7
USING THE UNIT SAFELY
fig.PD-85-Set.e
When attaching the PD-85BK to the mount, be sure to
tighten the stand fixing screw securely. If it remains
loose, the pad could fall off.
fig.PD-85-HR.e_90
To play the sound assigned to the head, hit only the head.
To play a rim shot, you must
strike both the head and the
rim of the pad simultaneously
.
• If hitting the head produces a rim sound instead, reduce
the Rim Sensitivity value on the TD-3. The only the head
shot will sound when it’s set to “OFF.”
• On the other hand, if you find it difficult to get rim shot
sounds to play, raise the Rim Sensitivity value.
For details, refer to the TD-3 Owner’s Manual (p. 59).
Cross Stick
fig.PD-85-XS.e_90
The cross stick sound is sometimes referred to as a “closed rim
shot.”
When using the PD-85BK to play the cross stick, be sure that
you
only strike the rim (outer edge) of the pad
. Placing
your hand on the head (center area) of the pad might prevent
the cross stick sound from being played properly.
Attaching the Pad to a Stand
Rod
Pass the rod through the pipe
that is inside the holder.
Tighten
Loosen
Playing the PD-85BK
Head Shot
Rim Shot
Head
Head
Rim
Rim
Rim
TD-3KV_e 7 ページ 2004年12月16日 木曜日 午後3時43分