15
Performing
Changing the Settings of Each Song
Here you can specify the song’s volume, playback method, and
playback speed.
1
In the SONG screen, select a song (p. 14).
2
Edit the song settings.
Knob
Explanation
[R1] (SONG) knob
Selects a song.
[R2] (FOLDER) knob
When playing back a song from the SD card,
selects a folder on the SD card (p. 14).
* Shown in the SD CARD tab.
[R3] (SPEED) knob
Changes the song’s playback speed.
* When you switch songs, this returns to
100%. Depending on the type of song, this
might not be available.
SONG INFO/FUNC screen (press the [DOWN] button)
Parameter
Value
Explanation
Loop Type
ONE SHOT
Play back only once and then stop.
LOOP
Play repeatedly.
Song Level
-INF–+6.0 [dB]
Song volume
Click Track
Level
Click track volume
* Only if there is a click track
corresponding to the song
Viewing song information
1
In the SONG screen, select a song (p. 14).
2
Press the PAGE [DOWN] button.
The SONG INFO/FUNC screen appears.
Display
Explanation
Type
Song type
Name
Song name
Folder
Song save location
In the case of an SD card, the save location
on the SD card is shown.
Total Time
Song playback time
* Not shown for songs containing only a
drum performance.
3
Press the PAGE [UP] button to return to the SONG screen.
Playing an Audio File as a Click (Click Track)
Separately from the song, you can prepare an audio file (WAV file)
and play it back as a click (click track).
Since the click track can play simultaneously with the song, it’s
convenient when you want a desired click sound to play back along
with the song.
* To play back a click track, you must prepare a song and a click
audio file in WAV format. MP3 files are not supported.
Preparing a click track audio file
1
Prepare the audio file (WAV file) that you want to play
back as a click track.
2
On your computer, edit the file name of the file that you
prepared in step 1.
Specify “song file name+
_Click
” as the name of the audio file that
you want to play as the click track.
Example)
If you want the click track to play back along with a song named
“TD-50.wav” then you would specify “TD-50
_Click
.wav” as the name
of the click audio file.
3
Save the click audio file in the same level as the song on
the SD card (p. 40).
In the case of the example, save “TD-50.wav” and “TD-50_Click.wav”
in the same level.
Playing back the click track along with the song
1
In the SONG screen, press the [F2] (SD CARD) button
2
Use the [R2] knob, [–] [+] buttons, or the dial to select the
song that you want to play back together with the click
track.
In the case of the example, select the song “TD-50.wav.”
3
Press the [F5] button to specify “CLICK ON.”
4
Press the [
s
] button.
The click track plays together with the song playback.
To adjust the volume of the click track, turn the [CLICK] knob.
In the case of the example, you can use the [SONG] knob to adjust
the volume of “TD-50.wav” and use the [CLICK] knob to adjust the
volume of “TD-50_Click.wav.”
MEMO
5
To mute the click track, press the [F5] button to specify
“CLICK OFF.”
5
You can also output the click track only to headphones
(p. 42).
