5
Getting Ready
Panel Descriptions
Top Panel
6
7
8
9
4
1
2
5
3
1
[MASTER] knob
Adjusts the volume of the MASTER OUT jacks.
[PHONES] knob
Adjusts the volume of the headphones connected to the PHONES
jack.
2
TRIG SELECT
[LOCK] button
If you press the [LOCK] button so its indicator is lit, the pad for
which settings are being made will remain selected even if you
strike a pad.
[RIM] button
When using a pad that provides rim support, this button specifies
whether you’re making settings for the head or the rim. In the case
of a pad that supports three-way triggering, this button switches
between the head, rim, and bell.
SELECT [
K
] [
J
] buttons
Select the pad (trigger input number) for which to make settings.
3
[F1]–[F5] buttons (function buttons)
These buttons change their function depending on the indication
in the display. Use them to switch the tabs that are shown in the
upper part of the display, or to specify the function that is shown in
the upper or lower part of the display.
[R1]–[R3] knobs (rotary knobs)
The functions of these knobs changes depending on the indication
in the display. They adjust the values that are shown in the lower
part of the display.
PAGE [UP] [DOWN] buttons
By pressing the PAGE [UP] [DOWN] buttons when they are lit, you
can switch pages in the screen.
TRIGGER ACTIVITY indicator
This lights when a trigger signal is received from a pad (a signal
indicating that the pad is struck). This lets you check whether the
pad is connected correctly.
Display
Shows various information for the operation.
4
[MIX IN] knob
Adjusts the volume that is input to the front panel and rear panel
MIX IN jacks.
[SONG] knob
Adjusts the volume of the song (audio file) (This does not affect the
sound of an internal song’s drum performance, nor the sound of a
recorded drum performance).
[SONG] button
Accesses the SONG screen. Press this when you want to play back
a song or recorded data, or when you want to make song-related
settings.
[CLICK] knob
Adjusts the volume of the click.
[CLICK] button
Allows you to sound the click, or to make settings for the tempo or
click. You’ll also press this for rhythm training.
[
s
] button
Plays/stops the song or the recorded data.