139
Chapter 8 Helpful Features
Chapter 8
Playing with a Drum kit Chain
fig.09-003a
1.
Press [CHAIN].
[CHAIN] lights, and Drum Kit Chain is switched on.
2.
Press [CURSOR] [
] or [
] to select the chain
number to be used.
3.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
call up the kits to be used in each selected step in the
chain.
4.
When the performance is finished, press [CHAIN] to
turn off the Drum Kit Chain function.
The [CHAIN] light goes out.
If differences in volume levels between kits is a problem,
press [MIXER] and adjust the overall kit volume
(MASTR) (p. 93).
With the Pad Switch and Foot Switch functions, you can use
the pads and a foot switch to call up drum kit chains. For more
details, refer to the sections on “Using a Pad to Perform
Button Operations (PAD SWITCH)” (p. 142) and “Using a
Foot Switch to Perform Button Operations (FOOT
SWITCH)” (p. 144).
What You Can Do Using
Pads and Foot Switches
You can play electronic instruments using the pads and hi-
hat control pedal. Furthermore, you can also use a foot
switch to switch drum kits.
Playing a Pattern by Hitting a
Pad (PAD PATTERN)
PAD PATTERN
This function starts playback of a pattern when a pad is
struck. This function provides a very convenient way to use
patterns during a live performance.
• If different patterns have been assigned to two or more pads,
striking another pad while a pattern is playing back will cause
pattern playback to switch to the newly selected pattern. If you
have switched to a pattern whose instrument settings are
different, the sound may be interrupted for an instant.
• Performances using the Pad Pattern function cannot be
recorded to sequencers.
• When the song is selected, patterns set to One Shot, or Loop
Play cannot be played back with the Pad Pattern function.
Only patterns set to Tap Play can be played back.
fig.02-001c
fig.09-004
1.
Confirm that [CHAIN] is not lit.
This function cannot be set when the Drum Kit Chain function
(p. 138) is on.
2.
Press [KIT], then [F3 (
MENU)].
[KIT] lights, and a pop-up menu appears.
3.
Press [DEC/-], rotate the VALUE dial, or press CURSOR
[
] to move the cursor to “PATTERN.”
4.
Press [F3] to confirm your choice.
The “PAD PATTERN SETTINGS” screen appears.
Summary of Contents for V-Drums TD-8
