background image

 

 

 

 

Before using the PD-80/PD-80R, you need to make the following settings.

 Head tension adjustment (p. 5)

 Settings for the percussion sound module (p. 2) 

Hoop (Rim)

Tuning Bolt

Washer

Sensor

Stand Fixing Screw

Head

Holder

Frame

Output Jack

Contents of the Package

Names of Components

PD-80 or PD-80R (pad unit)

Connection Cable

Tuning Key

Owner's Manual (this manual)

 

Owner's Manual

 

Thank you, and congratulations on your choice of the Roland PD-80/PD-80R V-Pad.

 

201a

 

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 3–4) and 
“IMPORTANT NOTES” (p. 4). These sections provide important information concerning the proper 
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every 
feature provided by your new unit, 

 

Owner’s manual

 

 should be read in its entirety. The manual should be 

saved and kept on hand as a convenient reference.

 

202

 

Copyright © 2003 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the 
written permission of ROLAND CORPORATION.

 

02892934          ’04-4-4N

PD-80/PD-80RW.e4 1 ページ 2004年3月1日 月曜日 午後2時28分

Summary of Contents for V-Drums V-Pad PD-80R









Reviews: