2
TD-10 (TDW-1 V-Cymbal Control, TDW-1)
TD-10 (Non expanded)
TD-8
TD-6V
TD-7
(*2)
TD-5
SPD-20
SPD-11
SPD-S
HPD-15
Trigger Type
PD-80: 8 A or 8 B, PD-80R: 8RA or 8RB
Sensitivity
5
Threshold
2
Curve
Linear
Scan Time
(*1) 1.8
Retrigger Cancel
(*1) 4
Mask Time
(*1) 8
Xtalk Cancel
(*1) 50
Mount Type
(*1) PadMount
Xstick Thrshld
75 (PD-80R only)
Rim Sens
8 (PD-80R only)
Trigger Type
12A
Sensitivity
3
Threshold
1
Curve
Linear
Scan Time
(*1) 1.8
Retrigger Cancel
(*1) 3
Mask Time
(*1) 12
Xtalk Cancel
(*1) OFF
Rim Sens
8 (PD-80R only)
TRIGGER TYPE
PD-80: 8 A or 8 B, PD-80R: 8RA or 8RB
SENSITIVITY
7
THRESHOLD
3
CURVE
LINEAR
RIM SENS
8 (PD-80R only)
SCAN TIME
PD-80R: 2, PD-80: 1
RETRIGCANCL
3
MASK TIME
0
CROSSTALK
45
CROSS STICK
5 (PD-80R only)
TrigType
PD-80: PD80/100, PD-80R: PD80R
Sensitivity
8
Threshold
PD-80R: 3, PD-80: 1
TrigCurve
LINEAR
Xtalk Cancel
40
Scan Time
1.0
Retrig Cancel
3
Mask Time
4
Rim Sens
11 (PD-80R only)
Cross Talk Group
OFF
Velocity Curve
Norm3
Choke
OFF
Max Dyna
5
MIn Dyna
9
Min Velo
1
Mask Time
0
Threshold
1
TRIGGER TYPE
P1
SENSITIVITY
4
THRESHOLD
1
CURVE
Lnr
TRIG SENS
8
TRIG THRESHOLD
0ß40
TRIG TYPE
120
TRIG CURVE
1
RIM SENS
1 (PD-80R only)
Trig Sens
8
Trig Threshold
1
Trig Mask Time
0
Trig Scan Time
20
Input Mode
PD-80: TRIGx2, PD-80R: HD/RM
Trigger Type
PD-80: PD-80/100, PD-80R: PD-80R
Sensitivity
8
Threshold
PD-80: 3, PD-80R: 2
Velocity Curve
LINEAR
Scan Time
1.0
Retrigger Cancel
PD-80: 4, PD-80R: 3
Mask Time
4
Xtalk Cancel
30
Rim Sensitivity
11 (PD-80R only)
Rim Gain
1.2 (PD-80R only)
Input Mode
PD-80: TRIGx2, PD-80R: HD/RM
Trig Type
PD-80: PD-80, PD-80R: PD-80R
Trig Sens
8
Curve
Linear
Threshold
2
Scan Time
1ms
Retrig Cancel
2
Mask Time
2ms
X-Talk Rate
50%
Rim Sens
8 (PD-80R only)
Recommended Settings for the Percussion Sound Module
*1
: You need to set each advanced trigger parameter after setting the trigger type.
*2
: Each trigger parameter can be set independently for the “head-side” and “rim-side.” Set to the same value for the head and rim.
Trigger parameters can be set individually for each patch.
Recommended settings for the trigger parameters when using the PD-80/PD-80R with various percussion sound
modules.
•
When used with a percussion sound module capable of positional sensing, you can obtain tonal changes by varying the location
at which the pad is struck.
•
You can perform rim shots and cross-sticking with the PD-80R. For information on sound generator and trigger input
combinations, refer to p. 6.
•
The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and the environment in
which it is being used.
•
For information on how to change the parameters for a percussion sound module. Refer to the documentation for the percussion
sound module you’re using.
PD-80/PD-80RW.e4 2 ページ ２００４年３月１日 月曜日 午後２時２８分
