6
M-200i Remote Setup Guide
Synchronizing with the Controls on the M-200i
Tap or slide right the [Sync knob and switch] switch to start synchronizing with the controls on the M-200i unit. Using switches or
dials on the M-200i unit, you can control this software.
* For details of synchronizing feature, refer to the M-200i Remote’s owner’s manual. Go to “Synchronizing the M-200i Operations and the Display of
this Software“.
fig.sync_sw_off.eps
Quit Synchronizing
Tap or slide left the [Sync knob and switch] switch to quit synchronizing.
fig.sync_sw_on.eps
You can start/quit synchronizing while the communication between an iPad and the M-200i is active.
