9
USING THE UNIT SAFELY
fig.CY-8.e
When mounting the CY-5 on an L-Rod (pad mount),
use ONLY the attachment set as shown below.
1.
Mounting the lower clutch and the clutch felt
(L).
Align the notched section as shown below. Then place the
clutch felt (L) so it fits securely.
2.
Mount the CY-5 so it fits the lower clutch as
shown below.
3.
Place the clutch felt (S), and while applying
some pressure, mount the upper clutch as
shown.
Afterwards, you can adjust the upper clutch to have the
movement you desire. If it is too loose, double triggering
may occur.
Be sure the ROLAND logo is on the opposite side of the
playing area.
CY-5
Size:
10 inches
Triggers:
2 (Bow, Edge)
Dimensions:
246 (W) x 246 (D) x 45 (H) mm
9-11/16 (W) x 9-11/16 (D) x 1-13/16 (H)
inches
Weight:
380 g
14 oz (without attachment)
Accessories:
Attachment Set for Hi-Hat (Upper Clutch,
Lower Clutch, Clutch Felt (L), Clutch Felt (S))
add
* Continuous playing may cause dis-coloration of the pad, but
this will not affect the Pad's function.
CY-5
(Hi-Hat)
Making the Settings
Bow Portion
Edge Portion
Pad Face
Output Jack
Upper Clutch
Clutch Felt (L)
Lower Clutch
Clutch Felt (S)
Notch
(Be sure to
orient it correctly)
Tighten the bolt with
a tuning key.
Specifications
Projection (Be sure to
orient it correctly)
Tighten the bolt with
a tuning key.
Apply pressure
TD-6KW_e 9 ページ ２００６年１月２４日 火曜日 午後６時３分
