4-21
12
13
14
Start the Peck4 on PC.
[Peck4] screen is displayed, and click [Put Parameters]
button.
[OPEN] screen is displayed.
Select the System Parameter file that is saved before the
Main Board replacement.
Click [Open]. Peck4 starts to send the System
Parameter to VP-540/300.
Click [Get Report] button to import the System Report
file.
Confirm that the System Parameter is reloaded properly.
The network settings set at the step 11 are
replaced with the ones saved in the System
Parameter as [Put Parameters] is executed.
Please do the network settings again if
necessary.