1-101
LEF2-300
1
R
EPLACEMENT
Linear Encoder Board Replacement
14.
Attach the print carriage board, and plug the connectors and connect the ribbon cables.
15.
Attach the print carriage board cover.
CAUTION
Remove the print carriage board cover by pushing the part indicated by the arrows because the top part of the support is
easy to break.
16.
Open the front cover, and move the print-head carriage to the left by hand.
17.
Attach the damper plate.
CAUTION
•
Fix the damper plate with screws while pressing it lightly with your hand. Be careful not to press it down to the dampers.
Dampers could break.
•
Tighten the screws at the bottom of the slotted holes.
18.
Move the print-head carriage in a whole width of the machine. Make sure that the encoder scale does not make contact
with the encoder module and also encoder scale is between the slit of the encoder module.
19.
Perform Chapter 2 "Linear Encoder Setup".