2-5
LEF2-300
2
Adjustment
Service Mode
SERVICE MENU
THERMISTOR CHK
THERMISTOR CHK
HEAD:25 C/ 77 F
THERMISTOR CHK
AMB
:
25 C/ 77 F
SERVICE MENU
SENSOR CHECK
HMCPwFLA
*
***
1234567
***
The first page shows the status of each sensor.
Each letter of the alphabet stands for the following.
H: Head Lock Sensor
M:Maintenance cover sensor
C:Front cover sensor
P:Panel cover sensor
w:Wiper origin sensor
F:Y axis origin sensor
L:Z axis origin sensor
A:Head gap sensor
SUB MENU
SERIAL NO.
SERIAL NO.
ZS00000
SERVICE MENU
SUB MENU
SUB MENU
CHANGE INKTYPE
CHANGE INKTYPE
EUV4 GG EUV4 GG
PIGMENT CMYKLcLm
:
PIG cm
ECO-UV2 CMYKGlGlWW
:
EUV GG
ECO-UV2 CMYKPrGlWW
:
EUV PG
ECO-UV4 CMYKGlGlWW
:
EUV4 GG
ECO-UV4 CMYKPrGlWW
:
EUV4 PG
UNKNOWN / Ink type not specified
NOW PROCESSING..
CARTRIDGE
SLOT 1
SL1 : CAPACITY
200cc
SL1 : CONSUM.
100.000cc
SL1 : TIME
0y000d00h00m00s
CARTRIDGE
SLOT 2
SL1 : SERIAL
1402A30C010000A5
SL1 : INK TYPE
EUV-K
SL1 : LOT NO.
40216A
SL1 : INSERT
1 times
SL1 :
FLAG
00000000
CARTRIDGE
SLOT 7
SLOT1
NO CARTRIDGE
SLOT1
NO IC CHIP
SLOT1
SYSTEM ERROR
SLOT1
DATA ERROR
When both sensors are off, the display is blank,
*
is displayed when
both sensor s are ON .
Serial No. of the ink cartridge IC is displayed.
Ink type of the ink cartridge IC is displayed.
Ink capacity of the ink cartridge IC is displayed.
Lot No. of the Ink cartridge IC is displayed.
Ink consumption of the ink cartridge is displayed.
The used time of the ink cartridge is displayed.
The insert count of the ink cartridge is displayed
The flag information of the ink cartridge is displayed.
IC status
It reads the information written on the IC of each carriage.Following messages are displayed when errors are found.
Ink cartridge is not inserted
A cartridge with no IC is inserted, wire breakage or short circuit
Data error
System error due to the damage of driver IC placed on INK TANK BOARD
Sensor check
This menu displays the real-time status of each sensor. It shows
*
when the sensor is ON.
The second page shows the status of each
cartridge sensor and ink empty sensor.
Each color has 2 positions and the left side
on the display shows the left-side head.
Blank: Cartridge not inserted, Ink remains
C: Cartridge inserted, Ink remains
E: Cartridge not inserted, Ink empty
*
: Cartridge inserted, Ink empty
Thermistor check
This menu is used for checking thermistor. It displays the temperatures read from the thermistor
placed on the center head (HEAD). The temperature on the left is indicated in celsius and so is the
right in fahrenheit.
Display Range: [HEAD] From 0 to 46 in Celsius. [AMB] From 0 to 95 in celsius.Since the temperature of
the device on the head board may rise, [HEAD] shows higher temperature than the room
temperature. Confirm that the temperature is not extremely low[AMB] indicates outside air
temperature.
Serial No.
This menu is for entering the serial No. of the machine in 7 digits. Cursor moves between digits
with [right] and [left] keys. The parameter can be changed with [up] and [down] keys.
Setup display
BUSY LED flashes
This menu is to change ink type. Different from the process
in the user menu, operations such as head wash and ink fill
are not included. This menu is used as a correction purpose when a
wrong type ink is selected. When the ink type is changed, ink system is
initialized internally.
Then, it exits the menu and setup is canceled.
Change ink type