2-27
LEF2-300
2
Adjustment
Print Head Alignment
12.
Tighten the screws that secure the print head in the reverse order of loosening, using the torque driver (Torque value:
20cN·m).
CAUTION
Do not overtighten the screws.
Top view
2
3
1
Vertical adjustment
13.
Loosen three screws that secure the print head in the order as shown below.
CAUTION
Loosen the screws that secure the print head approximately 1/2 turn. If you loosen them too much, print head alignment
cannot be performed properly.
Top view
2
1
3