2-85
LEF2-300
2
Adjustment
Head Gap Sensor Position Adjustment
6.
Perform [SERVICE MENU] > [SENSOR CHECK] and confirm the status of sensor [A].
HCPwFLRAT
SERVICE MENU
SENSOR CHECK
[ ][ ]
* * * *
7.
Flip the metal plate of head gap sensor with your fingers in order to put the sensor back to the original position, and turn
the screw counterclockwise until the status of sensor [A] is OFF. When the sensor is OFF, [*] mark is not displayed.
NOTE
•
When you turn the screw counterclockwise, the head gap sensor moves backward.
HCPwFLRAT
* * * *
•
The screw head should be contacted with the metal plate always.
GOOD
Screw head is contacted with
the metal plate.
NO GOOD
Screw head is not contacted
with the metal plate.
