4-14
LEF2-300
4
Ser
vice
Act
iv
it
ies
Maintenance Checklist
LEF2-300 Maintenance Checklist
Date:
User name:
Serial number:
Check items
Important Points
Check
Interview with the customer
Ask the customer if there is something that he/she is concerned about.
□
Done
Output / Check report before maintenance
[Get report by Peck], or print [ALL] in service menu.
□
Done
Check drain bottle
If a large amount of ink is discharged in the drain bottle, dispose of it and give
an explanation to the customer. Make sure to reset the discharged ink count.
□
Good
□
Disposed
□
Reset
Upgrade firmware
Upgrade if it is not the latest version.
□
Done
□
Not necessary
Ver._______
Check
Consumable
Parts
Parts name
UV lamp
Check if the UV glasses are contaminated with dust or ink.
If a cleaning is needed, clean them manually with cleaning liquid (SL-CL) or
ethanol.
□
Cleaned
Print head
Determine if the print heads should be replaced based on the SHOT COUNT in
the history report, the test print result, and the customer's interview.
Replacement cycle: 6 billion shots/nozzle
□
Good
□
Replaced
□
Reset
Perform manual cleaning by using cleaning sticks and cleaning liquid.
□
Cleaned
Output the test patterns for BIAS, VERTICAL, HORIZONTAL to check the error,
and perform adjustment if necessary.
□
Good
□
Adjusted
Scan motor
Determine if it should be replaced based on MOTOR ERROR and MOTOR
HOURS in the History Report, or on the motor sound when performing a print
and the customer's interview. Put some grease (FLOIL G-902 10ML_02) on the
gear if you replace the motor.
Replacement cycle: 3,000 hours
□
Good
□
Replaced
□
Reset
Wiper
Determine if it should be replaced based on the deformation or the time
period from the last replacement.
If replacement is unnecessary, clean them manually using cleaning stick and
cleaning liquid.
Replacement Cycle: 6 months or WIPING COUNT 3,000 times rubbing 100 times
□
Cleaned
□
Replaced
Cap top
Determine if it should be replaced based on the performance of the cleaning
or the time period from the last replacement. If replacement is unnecessary,
clean them manually using cleaning stick and cleaning liquid.
Replacement cycle: 6 months
□
Good
□
Cleaned
□
Replaced
Sponge for wipers
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 12 months
□
Good
□
Replaced
Wiper cleaner
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 6 months or WIPING COUNT 1,000 times or rubbing 100
times
□
Good
□
Replaced
Mist filter
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 500 hours
□
Good
□
Replaced
Z-axis shaft
/ head gap sensor
Lubrication cycle (FLOIL G-902 10ML_02): 6 months
□
Done
□
Not necessary
Lithium battery
Replacement cycle: 24 months
□
Good
□
Replaced
Front cover cushion
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 6 months
□
Good
□
Replaced
UV lamp filter
Replace the filter when it is clogged.
□
Good
□
Replaced
Sponge unit for head
refreshing
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 6 months
□
Good
□
Replaced
Pad for head refreshing
cover
Determine if it should be replaced based on its appearance or the time period
from the last replacement.
Replacement cycle: 24 months
□
Good
□
Replaced