27
Before You Begin Playing
Restoring the Factory Settings
(Factory Reset)
This function resets all the VK-88’s settings to their factory default values.
1
Make sure that the volume is turned to the minimum position.
2
Press the lower portion of the VK-88’s [POWER] switch to turn off the
power.
fig.01-07
3
While holding down the [BANK] button, [WRITE] button and [H-BAR
MANUAL] button, press the upper portion of the [POWER] switch to
turn on the power.
4
Press the [BANK] button, [WRITE] button and [H-BAR MANUAL]
button until all of the panel indicators light.
All settings will be restored to what they were when the instrument first left the
factory.
fig.01-07
NOTE
When you perform the Factory
Reset operation, all the data
you created will be lost from
the VK-88’s internal memory.
If the VK-88 contains
important data that you wish
to keep, use the Bulk Dump
operation to save the data on
an external MIDI sequencer,
etc. before you perform the
Factory Reset operation (p. 87).
NOTE
Never turn off the power
while Factory Reset is being
performed.
VK-88_e.book 27 ページ ２００４年４月２０日 火曜日 午前９時０分
