49
Saving Your Settings (Registration)
■
Saving to a Registration in the Same Bank
1
Make the panel settings that you want to save in the registration.
2
Hold down the [WRITE] button, and press one of the buttons from [1]
through [8] to specify the save-destination registration.
While the registration is being saved, the indicator of the selected registration
number button will blink. Once the registration has been saved, the indicator will
change from blinking to lit.
■
Saving to a Registration in Another Bank
1
Make the panel settings that you want to save in the registration.
2
Hold down the [WRITE] button, and press the [BANK] button and one of
the buttons from [1] through [8].
The save-destination bank will be selected.
3
Hold down the [WRITE] button and press one of the buttons from [1]
through [8] to specify the save-destination registration.
While the registration is being saved, the indicator of the selected registration
number button will blink. When the registration has been saved, the indicator will
change from blinking to lit.
■
Copying a Registration
Selecting the Copy-source Registration
1
Hold down the [BANK] button and press one of the buttons from [1]
through [8] to select the bank of the copy-source registration.
2
Press one of the buttons from [1] through [8] to select the number of the
copy-source registration.
The indicator of the number button you selected will light.
Selecting the Copy-destination Registration
3
Hold down the [WRITE] button and [BANK] button, and press one of the
buttons from [1] through [8] to specify the bank of the copy-destination
registration.
The indicator of the number button you selected will light.
4
Hold down the [WRITE] button and press one of the buttons from [1]
through [8] to select the copy-destination registration number.
While the registration is being saved, the indicator of the selected registration
number will blink. When the registration has been saved, the indicator will change
from blinking to lit.
NOTE
Never turn off the power
while a registration is being
saved. Doing so may
damage the unit.
NOTE
Never turn off the power
while a registration is being
saved. Doing so may
damage the unit.
The indicator of the selected
bank will light while you hold
down the [BANK] button.
If you want to save the settings
in a registration of the same
bank, step 3 is not necessary.
NOTE
Never turn off the power
while a registration is being
saved. Doing so may
damage the unit.
VK-88_e.book 49 ページ ２００４年４月２０日 火曜日 午前９時０分
