47
Playing the Organ
Adding Effects to the Pedal Part
■
Adding a Decay to the Pedal Part (Pedal Sustain)
You can add sustain to the organ voice’s Pedal Part.
1
Press the PEDAL [SUSTAIN] button to make its indicator light.
Sustain is added to the Pedal Part and Pedal Orchestral Tones.
■
Sharpening the Attack of the Pedal Part
(Pedal Attack)
You can emphasize the attack of the organ voice’s Pedal Part.
1
Press the PEDAL [ATTACK] button to make its indicator light.
The attack in the Pedal Part is increased.
When the PEDAL [SUSTAIN] button is on and you play the organ Pedal Part,
sustain is applied to the last note played.
This prevents the sound from becoming unclear, even when sustain is applied to
the Pedal Part.
You can set the length of the
sustain after you release the
keys when the PEDAL
[SUSTAIN] button is on (p. 83).
NOTE
Sustain is not applied to the
Pedal Tone when you set the
PEDAL [TO LOWER] button
to ON and play the Pedal Tone
in the lower keys.
You can set the attack sound’s
decay time when the PEDAL
[ATTACK] button is on (p. 83).
You can set the attack sound
volume when the PEDAL
[ATTACK] button is on (p. 83).
VK-88_e.book 47 ページ 2004年4月20日 火曜日 午前9時0分