13
Video Operations
7
Split
1
[SCENE EDIT] button
0
“SCENE A”–“SCENE E”
0
select
“TYPE.”
Shows the type of
screen configuration
that is currently
registered.
2
Turn the [VALUE] knob to select “SPLIT,” and press to
confirm.
3
Use the [VALUE] knob to select a menu item.
Menu item
Explanation
PATTERN
Specifies the pattern for the split.
V.CENTER:
A B
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
H.CENTER:
A B
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
V.STRETCH:
A B
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
H.STRETCH:
A B
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
CENTER
Adjusts the position at which the screen is
divided.
A CH (LEFT/UPPER)
Specifies the video that is shown in the left or
upper side.
B CH (RIGHT/LOWER)
Specifies the video that is shown in the right
or lower side.
A-CENTER
(*1)
Adjusts the horizontal/vertical position of the
video that’s shown in the left or upper area.
B-CENTER
(*1)
Adjusts the horizontal/vertical position of the
video that’s shown in the right or lower area.
(*1) This is valid if “PATTERN” is set to “V.CENTER” or “H.CENTER.”
2
Turn the [VALUE] knob to edit the value of the setting,
and press to confirm.
3
Press the [SCENE EDIT] button several times to close the
menu.
MEMO
A still image loaded into the unit (p. 15) cannot be made smaller.
If you use “V.STRETCH” or “H.STRETCH” to show a still image,
the stretch effect might not apply correctly depending on the
resolution of the still image or the display region of the screen.
Copying a scene
Here’s how to copy the settings registered in a scene to another scene.
1
[SCENE EDIT] button
0
select “COPY.”
The SCENE COPY menu appears.
2
Use the [VALUE] knob to select a menu item.
Menu item
Explanation
SOURCE
Specifies the copy-source scene.
DESTINATION
Specifies the copy-destination scene.
3
Turn the [VALUE] knob to select one of “SCENE A” –
“SCENE E,” and press to confirm.
4
Use the [VALUE] knob to select “COPY.”
A confirmation message appears.
If you want to cancel the operation, press the [MENU] button.
5
Turn the [VALUE] knob to select “YES,” and press to
confirm.
The scene is copied. When the operation is finished, the message
“COMPLETED” appears.
6
Press the [VALUE] knob to close the message.
7
Press the [SCENE EDIT] button several times to close the
menu.