Roland VR-1HD Reference Manual Download

Page: 7 / 48

Video Input/Output Settings

List of Compatible Video Formats

Input video formats

Frame rate

When set to “59.94 Hz”

When set to “50 Hz”

480/59.94i

576/50i

480/59.94p

576/50p

720/59.94p

720/50p

1080/59.94i

1080/50i

1080/59.94p

1080/50p

VGA (640 x 480/60 Hz)

SVGA (800 x 600/60 Hz)

XGA (1024 x 768/60 Hz)

WXGA (1280 x 800/60 Hz)

HD (1280 x 720/60 Hz)

SXGA (1280 x 1024/60 Hz)

FWXGA (1366 x 768/60 Hz)

SXGA+ (1400 x 1050/60 Hz)

UXGA (1600 x 1200/60 Hz)

FHD (1920 x 1080/60 Hz)

WUXGA (1920 x 1200/60 Hz)

Audio input format

INPUT 1–3 connectors

Linear PCM, 24 bits, 48 kHz, stereo

USB STREAM port

Linear PCM, 16 bits, 48 kHz, stereo

Output video formats

MAIN/MONITOR (MENU) connectors

Frame rate

When set to “59.94 Hz”

When set to “50 Hz”

720/59.94p

720/50p

1080/59.94i

1080/50i

1080/59.94p

1080/50p

XGA (1024 x 768/60 Hz)

XGA (1024 x 768/75 Hz)

WXGA (1280 x 800/60 Hz)

WXGA (1280 x 800/75Hz)

SXGA (1280 x 1024/60 Hz)

SXGA (1280 x 1024/75 Hz)

FWXGA (1366 x 768/60 Hz)

FWXGA (1366 x 768/75 Hz)

SXGA+ (1400 x 1050/60 Hz)

SXGA+ (1400 x 1050/75 Hz)

UXGA (1600 x 1200/60 Hz)

FHD (1920 x 1080/60 Hz)

WUXGA (1920 x 1200/60 Hz)

USB STREAM port

Frame rate

When set to “59.94 Hz”

When set to “50 Hz”

854 x 480/29.97p

854 x 480/25p

854 x 480/59.94p

854 x 480/50p

1280 x 720/29.97p

1280 x 720/25p

1280 x 720/59.94p

1280 x 720/50p

1920 x 1080/29.97p

1920 x 1080/25p

Audio input format

MAIN connector
MONITOR (MENU) connector

Linear PCM, 24 bits, 48 kHz, stereo

USB STREAM port

Linear PCM, 16 bits, 48 kHz, stereo

Setting the Output Format

Here’s how to specify the output format as appropriate for the device

that’s connected.

MAIN/MONITOR (MENU) connectors

[MENU] button

“VIDEO OUTPUT”

select “OUTPUT

FORMAT.”

Turn the [VALUE] knob to select the output format, and

press to confirm.

The output format switches, and a confirmation message appears.

If you want to cancel the operation, press the [MENU] button.

* If the changed format is not compatible with the output

destination device, a confirmation message does not appear. In

approximately 20 seconds the setting returns to its previous state.

Turn the [VALUE] knob to select “YES,” and press to confirm.

The message “COMPLETED” appears.

* If you don’t confirm within ten seconds, the change is not applied,

and the setting returns to its previous state.

Press the [VALUE] knob to close the message.

Press the [MENU] button several times to close the menu.

USB STREAM port

Here’s how the video converted to the specified “OUTPUT FORMAT”

can be further converted into a format that can be streamed.

[MENU] button

“VIDEO OUTPUT”

select “USB

FORMAT.”

Turn the [VALUE] knob to select the output format, and

press to confirm.

The output format switches.

Press the [MENU] button several times to close the menu.

About frame rate

The VR-1HD supports the frame rates “59.94 Hz” and “50 Hz.” To

specify the frame rate, use the [MENU] button

“SYSTEM”

“FRAME RATE.”
The USB output also supports the frame rates “29.97 Hz” and “25

Hz.” When you specify the output format of the USB STREAM port,

you select a combination of resolution and frame rate.

Summary of Contents for VR-1HD

















































Search results

Summary of Contents for VR-1HD

Reviews:

Related manuals for VR-1HD

Brands by name

Popular brands

Roland VR-1HD, Reference Manual

Search results

Summary of Contents for VR-1HD

Reviews:

Related manuals for VR-1HD

Brands by name

Popular brands