23
Audio Operations
Playing Back Music Files
Here’s how to play back the internal music files or music files (.wav) that are saved on a USB flash drive. By playing back sound effects such as
jingles or applause, or background music, you can make your stream or program more enjoyable.
NOTE
5
When using a USB flash drive for the first time, you must
format it using the VR-1HD (p. 27).
5
Depending on the USB flash drive, recognition of the flash
drive might take some time.
Music files that can be played
Format (extension)
WAV (.wav)
Sample rate
44.1, 48 kHz
Bit depth
16 bits
Number of channels
Stereo, mono
File size
2 GB or less
File name
Up to eight single-byte alphanumeric characters
* The extension “.wav” must be added.
Playing back
1
Press the AUDIO EFFECTS [2] or [3] button.
The button lights, and the music file plays.
* With the factory settings, an internal music file will play.
[2] button
BriskAfternoon: background music sample
[3] button
Applause: sound effect sample (applause)
2
To stop the music file, press the AUDIO EFFECTS [2] or [3]
button once again.
If loop playback is off, the music file stops automatically when it
has played to the end.
MEMO
5
Music files shorter than 10 ms might not play correctly.
5
The VR-1HD plays back the music file directly from the
connected USB flash drive. Even if a music file on the USB flash
drive is selected, it will not play unless the USB flash drive is
connected.
5
With the factory settings, the AUDIO EFFECTS [2][3] buttons
are assigned the music file play/stop function “PLAYBACK
(BGM/SE).”
You can use the [MENU] button
0
“AUDIO EFFECTS”
0
“EFFECTS 1”–“EFFECTS 4”
0
“ASSIGN” to change the function
that’s assigned.
Selecting a music file from a USB flash drive
Here’s how to play back a music file that’s saved on a USB flash drive.
1
Save the music file in the root directory of the USB flash
drive.
2
Connect the USB flash drive containing the music file to
the USB MEMORY port.
3
[MENU] button
0
“AUDIO EFFECTS”
0
“EFFECTS 2” or
“EFFECTS 3”
0
select “AUDIO ASSIGN.”
A list of clips appears. “BriskAfternoon” and “Applause” are internal
music files.
4
Use the [VALUE] knob to select “USB MEMORY.”
A list of the music files on the USB flash drive appears.
5
Turn the [VALUE] knob to select the music file that you
want to play, and press to confirm.
A confirmation message appears.
If you want to cancel the operation, press the [MENU] button.
6
Turn the [VALUE] knob to select “YES,” then press the
knob to confirm.
The message “COMPLETED” appears.
7
Press the [VALUE] knob to close the message.
8
Press the [MENU] button several times to close the menu.
Specifying the playback method
You can make the music file play as a loop, or make it fade-in/out.
Press the [MENU] button
0
“AUDIO EFFECTS”
0
choose “EFFECTS 1”–
“EFFECTS 4,” and set the following menu items.
7
When ASSIGN = PLAYBACK (BGM/SE)
Menu item
Explanation
LEVEL
Adjusts the playback volume of the music file.
LOOP
Turns loop playback on/off.
FADE IN
Specifies the fade-in time of the music file.
FADE OUT
Specifies the fade-out time of the music file.
