41
Menu List
SYSTEM Menu
Menu item
Value
(bold text: default value)
Explanation
HDCP
OFF
, ON
Specifies whether HDCP is enabled (ON) or disabled (OFF). When set to “ON,” copyright-
protected (HDCP) video can be input. HDCP is also added to the video that is output.
* If this is “ON,” video/audio is not output from the USB STREAM port.
FRAME RATE
59 94
, 50Hz
Specifies the frame rate.
* When you change the setting, the change is not applied until you press the [VALUE] knob to
confirm.
TEST PATTERN
OFF
, 75% COLOR BAR,
100% COLOR BAR, RAMP, STEP,
HATCH
Specifies the test pattern.
TEST TONE
OFF
, -20dB, -10dB, 0dB, 0dB-L,
0dB-R
Specifies the test tone. If this is set to “0dB-L” or “0dB-R,” a test tone is output from the left
channel (L) or right channel (R) respectively.
PANEL LOCK
[ENTER]
Displays the PANEL LOCK menu.
Specify what panel lock will affect (ON) or will not affect (OFF).
Menu item
Value
(bold text: default value)
Explanation
ALL
OFF
, ON
The settings of the following buttons and knobs are turned on/off together.
MENU
OFF
, ON
[MENU] button
VALUE
OFF
, ON
[VALUE] knob
INPUT SELECT
OFF
, ON
INPUT [1]–[3] button
SCENE EDIT
OFF
, ON
[SCENE EDIT] button
SCENE SELECT
OFF
, ON
SCENE [A]–[E] button
AUTO SW
OFF
, ON
[AUTO SW] button
ON AIR
OFF
, ON
[ON AIR] button
KEY
OFF
, ON
[KEY] button
AUDIO EFFECTS
OFF
, ON
AUDIO EFFECTS [1]–[4] button
MIC 1 FADER
OFF
, ON
[MIC 1] fader
MIC 2 FADER
OFF
, ON
[MIC 2] fader
LINE IN FADER
OFF
, ON
[LINE] fader
MAIN VOLUME
OFF
, ON
[MAIN] knob
USB STREAM VOLUME
OFF
, ON
[USB STREAM] knob
PHONES VOLUME
OFF
, ON
[PHONES] knob
LEVEL SETUP
OFF
, ON
[LEVEL SETUP] button
Locking/unlocking the operation panel
When you simultaneously hold down the [MENU] button and [SCENE EDIT] button for three seconds or longer, the operation
panel is locked or unlocked (p. 27).
LED DIMMER
0–
7
Adjusts the brightness when the buttons or indicators are lit.
* Even with a setting of “0,” the buttons and indicators do not go completely dark.
AUTO INPUT DETECT
OFF,
ON
Turns the auto input detect function on/off. If this is “ON,” the input is automatically detected
when the video input currently being output is interrupted, and the video is switched.
* If a scene is selected, the auto input detect function is disabled.
DELETE STILL IMAGE
1
, 2
Selects the internal memory whose still image will be deleted. Press the [VALUE] knob to
delete the loaded still image.
* A “ “ symbol is shown for an internal memory in which a still image is loaded.
AUTO POWER OFF
OFF
, ON
Turns the Auto Off function on/off.
If this is “ON,” the power to the VR-1HD turns off automatically when all of the following states
persist for 240 minutes.
5
No operation performed on the VR-1HD
5
No audio or video input
5
No equipment is connected to the MAIN/MONITOR (MENU)/THRU connectors
FACTORY RESET
[EXEC]
Returns the unit to its factory defaults.
VERSION
—
Displays the version of the system program.
