Roland VR-3, Reference

18

MIDI Implementations

When COM:MIDI OUT is [THRU], this unit transmits the received messages. 

When COM:MIDI OUT is [OUT], this unit generates and transmits the messages as below. 

■

Channel Voice Messages

●

Note Off

Status 

2nd Byte 

3rd Byte

———- ——— 

———

8nH        

kkH       

40H

* Transmits the same note number when note on is transmitted.

●

Note On

Status 

2nd Byte 

3rd Byte

———- ——— 

———

9nH        

kkH       

40H

* Transmits when [AR] is selected as VIDEO SEL TYPE.

* When video switching is performed, note number is transmitted after program change.

* For corresponding combination of bank select/program change and the video channels, refer to “STD:VIDEO SEL TYPE” (p. 4).

●

Control Change

❍

Bank Select (Controller Number 0,32)

Status 

2nd Byte 

3rd Byte

———- ——— 

———

BnH        

00H       

mmH

BnH        

20H       

llH

mm,ll = Bank Number : 00 00H, 01 00H (bank.1, bank.2)

* Transmits when [VLINK] is selected as VIDEO SEL TYPE.

* When video switching is performed, bank number is transmitted prior to program change.

* For corresponding combination of bank select/program change and the video channels, refer to “STD:VIDEO SEL TYPE” (p. 4).

❍

Panpot (Controller Number 10)

Status 

2nd Byte 

3rd Byte

———- ——— 

———

BnH        

0AH       

vvH

* Transmits value when [1] slider of the audio mixer is controlled.

❍

Expression (Controller Number 11)

Status 

2nd Byte 

3rd Byte

———- ——— 

———

BnH        

0BH       

vvH

* Transmits value when [2] slider of the audio mixer is controlled.

❍

Effect Control 1 (Controller Number 12)

Status 

2nd Byte 

3rd Byte

———- ——— 

———

BnH        

0CH       

vvH

* Transmits value when [3] slider of the audio mixer is controlled.

2. MIDI Messages Transmitted from MIDI OUT

2-1. Transmission of the Received Messages

2-2. Transmission of the Generated Messages