Appendices
51
Main Output Audio
(MAIN [SETUP] button)
Setting item
Value
Explanation
MAIN LEVEL
0–127
This adjusts the volume level of the main output audio.
AUX LEVEL
0
–127
This adjusts the volume level of audio output from the AUX bus.
PHONES LVL
0–127
This adjusts the volume of headphones connected to the PHONES jacks.
USB LEVEL
-63–+63
This adjusts the volume level of audio output from the USB port.
USB DELAY
0.0
–500.0 ms
This adjusts the delay time for audio output from the USB port.
EQ HI
-15–
0
–15 dB
This boosts or attenuates the high band.
FREQ
700 Hz–
8.00 KHz
–11.0 KHz
This adjusts the center frequency when changing the sound quality in the high band.
EQ MID
-15–
0
–15 dB
This boosts or attenuates the middle band.
FREQ
20.0 Hz–
2.50 KHz
–10.0 KHz
This adjusts the center frequency when changing the sound quality in the middle band.
Q
0.5
–16.0
This adjusts the width of the frequency band when boosting or attenuating the middle band.
EQ LO
-15–
0
–15 dB
This boosts or attenuates the low band.
FREQ
55 Hz–
110 Hz
–800 Hz
This adjusts the center frequency when changing the sound quality in the low band.
REVERB
0–127
This adjusts the return level from reverb of the audio. A setting of “0” results in no reverb
applied.
TIME
0.0–
1.0
–5.0 s
This adjusts the length of the reverb.
TYPE
Room
, Hall
This specifies the type of reverb.
MASTERING
ON,
OFF
This switches mastering on and off.
NS
0
–127
This adjusts the degree of application of the noise suppressor.
ENHANCER
0
–127
This adjusts the degree of application of the enhancer.
MASTER HIGH
0
–127
This suppresses high-frequency distortion and adjusts the sound to have sustained tones.
MASTER MID
0
–127
This suppresses midrange distortion and adjusts the sound to have distinct tones.
MASTER LO
0
–127
This suppresses low-frequency distortion and adjusts the sound to have stable tones.
BUS SELECT
-
This displays the BUS SELECT screen (p. 39).
AUDIO FOLLOW
-
This displays the AUDIO FOLLOW screen (see below).
SOLO CLEAR
-
This clears all Solo settings.
MUTE CLEAR
-
This clears all Mute settings.
AUDIO FOLLOW Screen
AUDIO FOLLOW
ON,
OFF
This sets the Audio Follow feature on or off.
(Matrix chart)
ON, OFF
This sets the input audio to use with Audio Follow for each video channel. When set to “ON,”
Audio Follow is applied.
Video Effects
(VIDEO FX [SETUP] button)
Setting item
Value
Explanation
FX1
STROBE, NEGATIVE, COLORIZE, FINDEDGE,
SILHOUETTE, MONOCHROME, SEPIA, EMBOSS,
POSTERIZE,
COLOR PASS
, MULTI, OFF
This sets the effect assign to “FX1” on the [VIDEO FX] knob. When set to “OFF,” no effect is
assigned.
FX2
STROBE, NEGATIVE, COLORIZE, FINDEDGE,
SILHOUETTE, MONOCHROME,
SEPIA
, EMBOSS,
POSTERIZE, COLOR PASS, MULTI, OFF
This sets the effect assign to “FX2” on the [VIDEO FX] knob. When set to “OFF,” no effect is
assigned.
Transition Effects
(TRANSITION [SETUP] button)
Setting item
Value
Explanation
MIX
MIX
, FAM, NAM
This sets the transition pattern assigned to the TRANSITION [MIX] button.
WIPE
Wipe01
–99, SWipe01–99,
Slide01–26, Stretch01–26
This sets the transition pattern assigned to the TRANSITION [WIPE] button.
