8
Panel Descriptions
Top Panel/Front Panel
13
21
9
6
7
4
17
16
11
22
1
1
2
15
14
12
10
3
18
19
20
8
5
No.
Name
Explanation
Page
1
Internal Microphones
These are internal microphones for picking up ambient audio. To adjust the level, use
11
the [INTERNAL MIC] knob.
* The internal microphones are sensitive enough to pick up sounds of the VR-3EX’s buttons and faders being operated.
2
[MENU] Button
This displays the menu screen on the monitor.
3
[VALUE] Knob
This selects menu items and changes setting values. Pressing the [VALUE] knob selects a menu item or applies
changes made to a setting value.
4
Monitor (Touch Screen)
•
This displays the incoming video from the sources, the VR-3EX’s output video, a volume level meter, menu screens,
and the like. To change the monitor’s view mode, use
13
the [MONITOR] buttons.
•
You change the picture and select menu items by touching the screen.
* Don’t touch the screen in two or more locations simultaneously; the locations cannot be detected correctly.
5
PHONES Jacks
You can use these to connect standard-type (1/4-inch) and mini-stereo headphones. You can use both at the same time. p. 15
Audio Section
This section is for mixing audio and adjusting the input sensitivity of the audio channels.
No.
Name
Explanation
Page
6
SIG/PEAK Indicators
These display the input level of the audio channels.
•
Lighted in green:
Input detected
•
Lighted in red:
Volume exceeded maximum input level
[GAIN] Knob
These adjust the gain (input sensitivity) of the audio channels.
[EQ] Knobs
You use the [HI], [MID], and [LO] knobs to adjust the sound quality of the audio channels. These let you emphasize or
attenuate the high (HI), midrange (MID), and low (LO) bands.
[SETUP] Button
These display the setup screens for the audio channels on the monitor.
-
7
Channel Faders
These adjust the volume levels of the audio channels
8
Level Meter
This displays the volume level of the main output audio.
[REVERB] Knob
This adjusts the return level from reverb of the audio.
[MAIN] Fader
This adjusts the volume level of the main output audio.
[SETUP] Button
This displays the setup screen for main audio output on the monitor.
-
