19
Video Composition Operations
Compositing Using Picture-in-Picture (PinP)
Here’s how to composite an inset screen (a small separate screen) onto the background video.
Inset screen
Background video
1
Press one of the VIDEO INPUT SELECT [1]–[4] buttons to
select the background video.
2
Press the PinP [SOURCE] button to access the PinP
Source screen.
3
Touch Source <SDI 1>–<HDMI 4> to select the inset
screen video.
4
Press the [EXIT] button to return to the previous menu
screen.
5
While holding your finger on the inset screen, slide to
adjust its position.
Select the layer to
preview.
6
Use the [VALUE] knob to adjust the size of the inset
screen.
7
Press the [MENU] button to close the menu screen.
8
Press the [PinP] button.
The [PinP] button is lit red, and the composited result is sent from
program output.
Each time you press the [PinP] button, the inset screen alternates
between visible and hidden.
MEMO
If mix or wipe are selected as the video transition effect, the
setting of the [TIME] knob specifies the time over which the inset
screen appears or disappears.
Making detailed settings for the inset screen
You can press the PinP [SOURCE] button
0
<Detail> to make detailed
settings for the inset screen.
Menu item
Explanation
Size
Adjusts the size (zoom).
Position H
Adjusts the horizontal position.
Position V
Adjusts the vertical position.
Cropping
Specifies the cropping type.
Size H
(*1)
Adjusts the horizontal size when cropped.
Size V
(*1)
Adjusts the vertical size when cropped.
View
Use the following items to adjust the video that is
shown in the inset screen.
Zoom
Adjusts the zoom.
Position H
Adjusts the horizontal position.
Position V
Adjusts the vertical position.
Border
Use the following items to adjust the border that is
added to the inset screen.
Red
Adjusts the red level of the border color.
Green
Adjusts the green level of the border color.
Blue
Adjusts the blue level of the border color.
Width
Adjusts the width of the border.
(*1) This is valid if “Cropping” is set to “Manual.”
