40
Menu List
Menu item
Value
(bold text: default value)
Explanation
Compressor
When you touch <Edit>, a detailed screen for the effect appears.
Compressor
OFF
, ON
Turns the compressor on/off.
Effect
Audio that exceeds the specified threshold level is compressed. This reduces the difference
between the maximum volume and minimum volume, making the audio more comfortable for
listening.
Threshold
-50–
-8
–0dB
Specifies the level used as the threshold at which the compressor is applied. Compression is applied to
audio that exceeds the threshold.
Ratio
1.00 : 1, 1.12 : 1, 1.25 : 1
1.40 : 1, 1.60 : 1, 1.80 : 1
2.00 : 1,
2 50 : 1
, 3.20 : 1
4.00 : 1, 5.60 : 1, 8.00 : 1
16.0 : 1, INF : 1
Specifies the degree of compression applied to the audio. The state in which no compression is applied is
defined as “1.”
Attack
0–
30
–100ms
Adjusts the time from when audio exceeding the threshold is input until when compression begins.
Release
30–
250
–5000ms
Adjusts the length of time until compression ends after audio falls below the threshold.
Makeup
-40–
0
–40dB
Adjusts the output volume level after applying the compressor.
Equalizer
When you touch <Edit>, a detailed screen for the effect appears.
Equalizer
OFF,
ON
Turns the equalizer on/off.
Effect This is a 4-band parametric equalizer. It lets you shape the character of the sound by boosting or
cutting four frequency regions.
High
-15.0–
0 0
– +15.0dB
Boosts or attenuates the high band.
Frequency
1.0–
10 0
–20.0kHz
Adjusts the center frequency when changing the tone quality in the high band.
Hi-Mid
-15–
0
– +15dB
Boosts or attenuates the high-midrange band.
Frequency
20.0Hz–
2 0kHz
–20.0kHz
Adjusts the center frequency when changing the tone quality in the high-midrange band.
Q
0.3–
1 0
–16.0
Adjusts the width of the frequency band when boosting or attenuating high-midrange band.
Lo-Mid
-15–
0
– +15dB
Boosts or attenuates the low-midrange band.
Frequency
20Hz–
500Hz
–20.0kHz
Adjusts the center frequency when changing the tone quality in the low-midrange band.
Q
0.3–
1 0
–16.0
Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Low
-15–
0
– +15dB
Boosts or attenuates the low band.
Frequency
20Hz–
100Hz
–2.0kHz
Adjusts the center frequency when changing the tone quality in the low band.
FX
(*3)
FX
OFF
, ON
Turns the voice changer or anti-feedback on/off.
Voice Change
Anti-Feedback
Selects the voice changer or anti-feedback.
Voice Change
Transforms the pitch or character of the voice that is input from the mic.
Anti-Feedback
Decreases the unpleasant acoustic feedback that occurs when a mic is brought near a speaker.
Voice Change
(*3) When you touch <Edit>, a detailed screen for the effect appears.
Pitch
-12–
+12
Adjusts the pitch of the voice in semitone steps. A setting of “0” is the original pitch.
Formant
-10–
+4
– +10
Adjusts the character (formant) of the voice. Settings in the negative (
–
) direction produce a more
masculine vocal character, and settings in the positive (+) direction produce a more feminine vocal
character. A setting of “0” is the original voice.
Robot
OFF
, ON
If this is “ON,” the voice is held at a fixed pitch, creating a mechanical robot-like impression.
Mix
0–
100
Adjusts the balance between the unprocessed voice (0) and the voice processed by the effect (100).
(*3) Only for channels 5/6 and 7/8. This can be set if “Input” is “MIC.”
