10 - USB, power and pedal cables can be run through
the large cutouts as illustrated.
11 - Place the Seaboard GRAND on the stand. It should
‘click’ into place when properly aligned. Make sure the
cables reach. Connect the power and USB cable to the
Seaboard GRAND. Finally, connect the USB cable to
your computer and the power supply to an appropriate
wall outlet. Remember, the power supply must be
connected to the Seaboard at all times
of operation.
12 - Use the last four screws to secure the Seaboard to
the stand from underneath through the final four holes.
10
12
11
