------------------------ Operations
Front Panel
LED Indicators
The LED turned green when the connected computer is powered-on. Its corresponding LED
illuminated red when a connected computer is selected.
Push Button
A single push button on the front panel is used to switch port between the two connected
computers.
Auto Scan
The system automatically scans through the power-on computers in sequence with a fixed
interval (see
Scan Time
below). The Auto Scan can be activated or aborted through the
hotkey command (see “Hotkey Commands” in the following section).
Scan Time
Four options available for users to set the duration of Scan Time, it Includes 3, 8, 15 and 30
seconds (see “Hotkey Commands” in the following section).
Note:
Scan Time is set to 3 seconds as default after blackout or reboot.
4
