- 3 -
1.1
Table of contents
Important Safety Instructions............................................................................... 2
Table of contents ................................................................................................. 3
Introduction......................................................................................................... 3
1. Presentation..................................................................................................... 3
2. Installation....................................................................................................... 4
3. Operation......................................................................................................... 5
4. Alarm .............................................................................................................. 5
5. Software and Interface Port(Option)................................................................. 6
Appendix a Troubleshooting................................................................................ 7
Appendix b Specifications ................................................................................... 7
Introduction
Please read and save this manual !
Thank you for selecting this uninterruptible power system (UPS). It provides you with a perfect
protection for connected equipment. The manual is a guide to install and use the UPS. It includes
important safety instructions for operation and correct installation of the UPS. If you should have any
problems with the UPS, please refer to this manual before calling customer service.
1. Presentation
The UPS is a line interactive uninterruptible power system (UPS). When utility input is normal, the UPS
would provide surge protection and energy to charge the internal battery. If the utility input is abnormal,
the UPS can supply AC power to the load immediately.
(1). Utilizes microprocessor based controls, it will minimizes the dependency on hardware. Beside this,
it maximizes system flexibility and optimizes the assurance of reliability.
(2). Automatic frequency selection to match with utility power.
(3). Hi level battery charger to prolong battery’s life and fully charge the battery.
(4). With actual overload protection both in line and battery mode.
1.1) Power Switch
1.2) Remote Port (option)
1.3) Phone Jack (option)
1.4) Output Bypass
1.5) Outlet Socket
1.6) External Battery Pack Connector (option)
1.7) AC Input
1.8) AC Fuse/ Breaker
1.9) Fan
- 4 -
For model with RS-232 port as communication port
For model with USB port as communication port
For model with RS-232/USB port as communication port( 3000VA / 220~240V Model)
2. Installation
2.1 Inspection
Inspect the UPS upon receipt. The packaging is recyclable; save it for reuse or dispose of it properly.
2.2 Utility Power
The input power cord on the rear panel needs to plug into a socket on the wall. Please notice the voltage
of utility power should match with the UPS. (For example, the UPS is 220V, the input utility power
should be 220V as well.)
2.3 Connection
The employed equipment’s power cords (such as computer) are plugged into the sockets on the rear
panel.
1.3 1.2
1.5
1.5
1.7
1.2
1.4
1.6
1.7
1.8
1.3
1.4
1.6
1.8
1.2
1.5
1.3
1.4
1.6
1.7
1.8
1.2
1.3
1.5
1.2
1.4
1.8
1.3
1.5
1.7
1.2
1.5
1.5
1.5
1.9
1.9
1.9
1.8
1.3
1.3
1.3
1.8
1.8
1.7
1.7
1.2
1.2
1.6
