User M anual of Network Video Recorder
109
8.6
Setting Alarm Response Actions
Purpose:
Alarm response actions will be activated when an alarm or exception occurs, including Full Screen M onitoring,
Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm Output and Send Email.
Full S creen Monitoring
When an alarm is triggered, the local monitor (VGA or HDM I monitor) display in full screen the video image
from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval
of 10 seconds (default dwell time). A different dwell time can be set by going to M enu >Configuration>Live View,
and set the value of Full Screen M onitoring Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
You must select during “Trigger Channel” settings the channel(s) you want to make full screen monitoring.
Audible Warning
Trigger an audible
beep
when an alarm is detected.
Notify S urveillance Center
Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC
installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured.
Please refer to
Chapter Configuring Remote Alarm Host
for details of alarm host configuration.
Email Linkage
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to
Chapter9.2.10 Configuring Email
for details of Email configuration.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
1.
Enter Alarm Output interface.
M enu> Configuration> Alarm> Alarm Output
Select an alarm output and set alarm name and dwell time. Click
S chedule
button to set the arming schedule
of alarm output.
If “M anually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to
M enu> M anual> Alarm.
Summary of Contents for UD.6L0202D1275A02
