User M anual of Network Video Recorder
123
Figure 9. 20
Email Settings Interface
5.
Configure the following Email settings:
Enable S erver Authentication (optional):
Check the checkbox to enable the server authentication feature.
User Name
: The user account of sender’s Email for SM TP server authentication.
Password
: The password of sender’s Email for SM TP server authentication.
S MTP S erver:
The SM TP Server IP address or host name (e.g., smtp.263xmail.com).
S MTP Port No.:
The SM TP port. The default TCP/IP port used for SM TP is 25.
Enable S S L (optional):
Click the checkbox to enable SSL if required by the SM TP server.
S ender:
The name of sender.
S ender’s Address:
The Email address of sender.
S elect Receivers:
Select the receiver. Up to 3 receivers can be configured.
Receiver:
The name of user to be notified.
Receiver’s Address:
The Email address of user to be notified.
Enable Attached Pictures:
Check the checkbox of
Enable Attached Picture
if you want to send email
with attached alarm images. The interval is the time of two adjacent alarm images. You can also set SM TP
port and enable SSL here.
Interval:
The interval refers to the time between two actions of sending attached pictures.
E-mail Test:
Sends a test message to verify that the SM TP server can be reached.
6.
Click
Apply
button to save the Email settings.
7.
You can click
Test
button to test whether your Email settings work. The corresponding At tention message
box will pop up .
9.2.11
Configuring UPnP™
Purpose:
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other network
devices on the network and establish functional network services for data sharing, communications, etc. You can
use the UPnP™ function to enable the fast connection of the device to the WAN via a router without port mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to
which your device is connected. When the network working mode of the device is set as multi-address, the Default
Summary of Contents for UD.6L0202D1275A02
