5
| Automate
™
Programming Instructions | MTSOLPAN-B
ROLLEASE ACMEDA
IMPORTANT!
Clean the window or surface with alcohol wipe.
Allow surface to dry.
Peel protective film off adhesive tapes.
Press firmly onto fixing surface.
Apply hand pressure for 5 seconds and check if firmly attached.
iii.
Ensure any cables are kept clear of fabric at all times.
Step 3.
Connect Solar Panel cable (female) connector to required (male) connector.
IMPORTANT!
Any partial or total covering of any solar panel cell will affect solar panel performance.
OPTION B.
Clean Solar panel front surface with alcohol wipe.
Allow surface to dry.
Peel protective film off one side of adhesive tape and attach to one end of Solar panel.
Press adhesive tape firmly onto Solar panel surface for 5 seconds to ensure good adhesion.
Ensure that adhesive tape does NOT cover any portion of the Solar panel cells.
Repeat previous steps for attaching adhesive tape to other end of Solar panel.
i.
ii.
Attaching Solar Panel via Adhesive Tape to a Window or surface
Step 2.
OPTION A.
Installing Solar panel
Install mounting bracket to wall/mounting point.
Fix Solar panel to mounting bracket.
i.
ii.
Attaching Mounting Bracket to Window Frame
