Page. 7
Skyline Bottom Up
Installation
Manual | October 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
PROBLEM
CAUSE
SOLUTION
1. Fabric roll returns slowly.
1a) Low bottom booster pre-turns
Increase bottom booster pre-turns
1. Lower shade
2. Use pre-tension tool to lock
chainfree control
3. Remove bottom tube
4. Apply additional pre-turns
5. Re-install bottom tube
2. Heavy when raising the weight bar
2a) Bottom Booster Pre-turns too high
Reduce bottom booster pre-turns
1. Lower shade
2. Use pre-tension tool to lock
chainfree control
3. Remove bottom tube
4. Remove pre-turns
5. Re-install bottom tube
2b) Top Booster Pre-turns too low
(if applicable)
Increase top booster pre-turns
1. Lower shade
2. Remove top tube
3. Apply additional pre-turns
4. Re-install top tube
3. Heavy when lowering the shade
3a) Top Booster Pre-turns too high
(if applicable)
Reduce top booster pre-turns
1. Lower shade
2. Remove top tube
3. Remove pre-turns
4. Re-install top tube
4. Poor visual appearance of fabric
4a) Shade tension too low
Increase bottom booster pre-turns
1. Lower shade
2. Use pre-tension tool to lock
chainfree control
3. Remove bottom tube
4. Apply additional pre-turns
5. Re-install bottom tube
4b) Weight bar sagging
Move spools & cord guides inwards
(MAX 30% of blind width from edge)
SECTION C
| TROUBLESHOOTING
TROUBLESHOOTING
www.shadesbymatiss.com | T. 800 493 2040 | email: info@shadesbymatiss.com
