LEFT HAND SPRING LOCKED
L
Page� 03
Wireguide Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALL FABRIC/SPRING TUBE INTO BOX
STEP 1� LOCK SPRING HEAD AS SHOWN
STEP 2� ADD PRE-TURNS
REFER TO PRE-TENSION CHARTS FOR PRE-TURNS REQUIRED (SEE FOLLOWING PAGES)
Rollease Acmeda does not recommend exceeding suggested pre-turn values
SECTION B: | INSTALLATION
Pre-Turn Spanner available through Rollease Acmeda
Order Part #: RB10-9102-025008
NOTE: Count the pre-turns when you hear the audible clicks
STEP 3� INSTALL FABRIC/SPRING TUBE
Ensure idler shafts are correctly installed
STEP 4� SIT THE WEIGHT BAR ON TOP OF THE GUIDE WIRES