25
Waterproof Case
• Insert Camera into Waterproof Case
1 . Ensure the case is clean .
2 . Insert the camera and make sure the lens fits neatly in the lens cavity .
3 . Close the locking clamps .
4 . The camera can be mounted using the accessories provided .
Battery
Before using the device for the first time, you must fully charge the battery .
• Charging the Battery
1 . Connect the camera to a computer or USB power supply (5V/2A) .
2 . The charging status light turns on while the battery is charging .
3 . The charging status light turns off when the battery is fully charged .
• Changing the Battery
1 . Hold the camera so that you can see the monitor of the camera and lever the battery compartment
from the right with your fingernail to open the battery compartment .
2 . Remove the battery .
3 . lnsert the new battery so the contacts line up with those of the camera .
Getting Started
• Turn On:
Press and hold the Power button for 3 seconds . When the camera is switched on, the power
indicator lights up .
•
Turn Off:
Press and hold the Power button for 3 seconds .