18
3.1.2 Record videos while driving
When the vehicle engine starts up and the Automatic Record function is
enabled, the device automatically turns on and starts recording. Recording
stops and shut down after the engine is switched off.
Note:
On some cars, the recording will continue when the engine is switched off.
If this happens, please manually turn off the cigarette lighter or remove
the car adapter from the cigarette lighter.
3.1.3 Emergency Recording
To start Emergency Recording, do the following:
1. During the recording period, press the
OK
button to enter emergency recording
mode. The wordings,
“Emergency”
, will
be displayed on the top right-hand corner
of the display screen. Files that are saved
during the emergency recording mode
will be protected.
2. Press the to stop recording immediately.
Note:
1. If the Collision Detection function is enabled and a collision is detected,
the device will automatically trigger the emergency recording. Please refer
to (4.2).
2. The emergency recording file is created as a new file, which will be
protected to avoid being overwritten by normal cycling recording. 8G
(or above) memory card can save up to 10 emergency video files. The alert
message of “Emergency files are full” will pop up on the screen when the
emergency recording files are full, and the oldest emergency file will be
automatically deleted when a new emergency recording file is created.
Summary of Contents for CarDVR-310
Page 1: ...CarDVR 310 User Guide in English www rollei com ...
Page 35: ...35 ...
