24
off after 30 seconds (the camcorder will turn off the
screen temporarily, but still in standby detection status.
Press any button to turn on the operation screen).
-
In the Motion and Collision Detection mode, when the
camcorder detects any motion in front of lens, or when
the camcorder detects collision, the automatic record
will be activated.
-
In this mode, when the camcorder detects collision or
any motion in front of lens, the video recording will be
triggered and the event will be recorded for 10 seconds
(per file). If the event lasts more than 10 seconds, the
camcorder will keep recording up to 2 minutes.
-
In this mode, the camcorder is in standby mode until
event happens. This mode will consume more battery
power.
•
Off: No parking monitoring activated.
4.
Press the
button to return recording screen.
Note:
1. If battery in a fully charged condition, it can record about 30 minutes video in
Motion and
Collision Detection
mode. As the camcorder is used, the battery
storage capacity will decrease gradually. This is a normal phenomenon for the
battery.
2. The video files taken in Parking Mode will be saved in “
Parking Mode
” folder,
which will not be overwritten by normal video files. However, if the remaining
memory capacity is not enough to save the last normal video file, the oldest
Parking Mode video will be deleted. Please always make sure you backup
Parking Mode video files.
3. Parking Mode folder can save about 40 parking mode files, when parking
mode files are full, loop recording will overwrite the oldest file.
