26
ENGLISH
6. Recording Mode
Taking pictures
Press the function button [5] under the RECORD symbol on the screen to switch
to capture mode . The loaded picture is displayed on the LCD monitor . Press the
middle function button [5] or the Record / Capture button to preview the image .
1. Press the CAPTURE button to capture and save an image.
The screen displays ”SAVE . . .“ .
Note:
An error message is displayed on the LCD monitor for 3 seconds .
(1) If the SD card is full, ”ERROR: MEMORY FULL“ is displayed.
(2) If no memory card is inserted, ”ERROR: NO SD CARD“ appears .
2 . Press any function button [5] to display the status bar at the top of the
screen .
Note:
The status bar will disappear after 15 seconds, or press the CAPTURE
button to return to preview mode .
– Press the left / right function button [5] to select the top settings .
– Then press the function button [5] under SELECT to apply the selected set-
ting .
– By selecting , gives you a preview of the current picture .
– By selecting , you can flip the current picture horizontally.
– By selecting , you can flip the current picture vertically.
– By selecting
, takes you to the menu to set the EV, RGB or Sharpness
values .