30
ENGLISH
7. Setting Mode
USB-UPLOAD
In this mode you can access your SD card from your computer .
Note:
While connected to a computer, you cannot use the slide film scanner.
1. Use the supplied USB-C cable to connect the slide film scanner directly to a
computer .
2. Select USB-UPLOAD from the settings menu, then press the function button
[5] (under SELECT) to enter the USB-UPLOAD menu. Wait for the slide film
scanner to connect to the computer . This may take a few seconds .
When the connection is established, the computer recognises the slide film
scanner as an external device .
3. When you are finished, press the disconnect button and then disconnect the
USB-C cable.
FORMAT
Note!
If you format the inserted SD card, all files on that card will be deleted. Save the files you need on
your computer before formatting . If the SD card is not compatible, format it on your computer .
1 . Select FORMAT from the settings menu, then press the function button [5]
(under SELECT) to enter the format menu .
2 . Press the Function button (under YES) to format the inserted SD card and go
to the HOME menu .
3 . Press the function button [5] (under NO) to return to the current card subme-
nu . return to the current submenu of the card .