69
Prepare the Quadrocopter
Adjusting the camera
The fixed camera can be manually adjusted in vertical tilt from 0 – 60°.
With the help of the app provided (page 81 et seq.), you can, among other
things, follow the live image of the camera and thus set the desired tilt
angle of the camera.
Folding out the flying arms
1. First unfold the front flight arms, followed by the rear flight arms. Make
sure that the flight arms engage slightly when unfolded.
2. Unfold all rotor blades.
Note: Attention!
All flight arms and rotor blades must be unfolded before the quadrocop-
ter is switched on, as this may affect the automatic calibration of the
quadrocopter.
Check the quadrocopter for any damage before each flight! Damaged
rotor blades affect the flight behaviour and increase the risk of accidents
or loss of the drone. Do not fly the drone if there is visible damage!
