79
Using the Quadrocopter
Setting the speed
You can set three speed modes: Beginner
mode, Normal mode and Advanced mode.
–
Beginner:
When the quadrocopter is
switched on, the Beginner mode is activa-
ted from the factory.
–
Normal:
Press the speed mode button (3 Speed Mode) [11]. The remote
control emits two acoustic signals. Normal mode is activated.
–
Advanced:
Press the speed mode button (3 Speed Mode) [11] again.
The remote control emits three acoustic signals. After pressing the 3
Speed Mode button [11] again, the remote control emits an acoustic
signal and you are back in beginner mode.
Aerobatic mode
To perform rolls and flips with the quadro-
copter in flight, press the Flip button (3D
Roll) [16]. An acoustic signal sounds for 4
seconds. During this time the quadrocopter
is in aerobatic mode.
During the time in which the aerobatic mode is activated, you can com-
plete the following flight manoeuvres. Make sure that there is enough
clearance in all directions around the quadrocopter.
