7
3. Inserting slides
Open the slide holder at the point marked “Open“ and place the open holder in front of you as
shown below. The slides can now be placed the right way up (not turned and not reversed) in the
recesses provided in the holder.
Close the slide holder and press down the edges until they engage.
Now insert the slide holder from the right into the Multi Scanner’s insertion slot for slide and
negative holders so that the white triangle marking is facing the front and is visible.
Slide the slide holder into the Multi Scanner until it engages noticeably in the first slide position.
Note:
• Caution: Do not insert slide holder from the left side into the insertion slot of the scanner
and do not pull the holder out of the right side of the scanner! Any damage resulting from
such incorrect handling, is not covered by the warranty!
• Handle slides with due care. Dust, scratches or fingerprints will be visible on the saved
image. When working with slides, wear cotton gloves, where possible. Use compressed air
for removing dust from slides. Such a device is not included with the Multi Scanner but can
be purchased from specialist retailers for office materials or electronic products.
