304045-6-7 en ma 2012-01
4/8
On/off pilot light
Outlet for juices and fats
Thermostatic pilot light
Juice collector tray
Thermostat
5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
- Unpack carefully the device of its packaging.
- Place the griddle plate on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the red sticker from the plate and the protective film around the machine
without forgetting the one on the drip tray (n°5 on picture). Use a solvent like acetone or
other solvents to remove these labels.
b) First starting
:
During the first use, warm your machine up outside during about 30 min to evacuate
residual smokes of manufacturing oil from the metallic parts. This may emit a slight
smell for a few moments.
1
2
3
5
1
2
4
4
5
3
