304045-6-7 en ma 2012-01
5/8
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Never use the machine without its drip tray (n°5 on picture).
Putting on
Turn on the thermostat control knob (n°3 on picture) on the wished position: the
green pilot light (n°1 on picture) and the orange pilot light (n°2 on picture) ignite.
The machine is warming up. Once orange pilot light (n°2 on picture) is off, the
machine reached the wished temperature.
Grease the plates before each cooking.
Temperature setting
Set the temperature by positioning the thermostat (n°3 on picture) to the desired
temperature. The orange pilot light (n°2 on picture) switches on if a higher level
of temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the energy con-
sumption.
If your food sticks on the plate, reduce the temperature of the thermostat
Command/Display
Function
Thermostat (n°3 on picture)
On/off + Temperature setting
Green pilot light
(n°1 on picture)
Machine on (pilot light on)
Machine off (pilot light off)
Orange pilot light
(n°2 on picture)
Machine is heating (pilot light on)
Temperature reached (pilot light off)
