Make sure the Roller-Pro Hopper E-scooter is turned off before working with any of its parts. The
scooter comes mostly assembled within the package.
Some minor assembly is required before riding. All parts and tools are included.
1.Speed indicator:
These numbers indicate the current speed.
2.Mode display:
The green light indicates the power is on. When in low speed mode, the maximum
speed is set to 15 km/h. To Increase to the second gear speed, simply press the on/off switch twice
to select high speed mode. The LED will turn into red indicating the maximum speed of 25 km/h.
3.Battery indicator:
There are four LED lights to indicate the battery capacity. The power consump
tion of the battery level indication will change from right to left. At first the light will be still, then will
flash and finally will go off. The 4 LED lights indicate a capacity of 100% - 86%; 3 lights indicate a
capacity of 85% - 71%. When no capacity is left, the 4 lights will go off and the scooter will stop
working. When this occurs, it is time to recharge the battery.
4.Power switch:
Short press the on/off button to switch on the scooter. Press and hold for
approximately 3 seconds to switch off the scooter. When switched on, short press the on/off
button to activate the headlight.
What’s in the Box?
Parts:
Assembling:
Control panel:
1 x Roller-Pro Hopper E-Scooter
1 x Charger
2 x Handles
1 x User Manual
4 x screws
Socket wrench
Valve connector
Warranty card
■
■
■
■
■
■
■
■
PARTS & FEATURES
FOLDING & ASSEMBLY
5
Picture may vary from
actual product
