21
Explanation of symbols
WARNING
WARNING
Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION
CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use eye protection
Use a respirator
Use ear protection
Use hand protection
Power tool complies with protection class I
Power tool complies with protection class II
Environmentally friendly disposal
CE conformity mark
eng eng
1.2 Article numbers
ROLLER’S Centro S1 drive unit
180000
ROLLER’S Centro S3 drive unit
180001
ROLLER’S Centro S2/3,5 drive unit
180012
ROLLER’S Centro SR drive unit
183000
ROLLER’S Centro DP drive unit
180003
Holder-up
180167
ROLLER’S Bohrständer S2 drill upright
183700
ROLLER’S Bohrständer T drill upright
183600
ROLLER’S Universal diamond core drilling crowns – inductively soldered
ROLLER’S UDKB 32 × 420 × UNC 1¼
181010
ROLLER’S UDKB 42 × 420 × UNC 1¼
181015
ROLLER’S UDKB 52 × 420 × UNC 1¼
181020
ROLLER’S UDKB 62 × 420 × UNC 1¼
181025
ROLLER’S UDKB 72 × 420 × UNC 1¼
181030
ROLLER’S UDKB 82 × 420 × UNC 1¼
181035
ROLLER’S UDKB 92 × 420 × UNC 1¼
181040
ROLLER’S UDKB 102 × 420 × UNC 1¼
181045
ROLLER’S UDKB 112 × 420 × UNC 1¼
181050
ROLLER’S UDKB 122 × 420 × UNC 1¼
181055
ROLLER’S UDKB 125 × 420 × UNC 1¼
181057
ROLLER’S UDKB 127 × 420 × UNC 1¼
181059
ROLLER’S UDKB 132 × 420 × UNC 1¼
181060
ROLLER’S UDKB 152 × 420 × UNC 1¼
181065
ROLLER’S UDKB 162 × 420 × UNC 1¼
181070
ROLLER’S UDKB 182 × 420 × UNC 1¼
181075
ROLLER’S UDKB 200 × 420 × UNC 1¼
181080
ROLLER’S UDKB 225 × 420 × UNC 1¼
181085
ROLLER’S UDKB 250 × 420 × UNC 1¼
181090
ROLLER’S UDKB 300 × 420 × UNC 1¼
181095
ROLLER’S Universal diamond core drilling crowns LS – laser welded
ROLLER’S UDKB LS 32 × 420 × UNC 1¼
181410
ROLLER’S UDKB LS 42 × 420 × UNC 1¼
181415
ROLLER’S UDKB LS 52 × 420 × UNC 1¼
181420
ROLLER’S UDKB LS 62 × 420 × UNC 1¼
181425
ROLLER’S UDKB LS 72 × 420 × UNC 1¼
181430
ROLLER’S UDKB LS 82 × 420 × UNC 1¼
181435
ROLLER’S UDKB LS 92 × 420 × UNC 1¼
181440
ROLLER’S UDKB LS 102 × 420 × UNC 1¼
181445
ROLLER’S UDKB LS 112 × 420 × UNC 1¼
181450
ROLLER’S UDKB LS 122 × 420 × UNC 1¼
181455
ROLLER’S UDKB LS 125 × 420 × UNC 1¼
181457
ROLLER’S UDKB LS 127 × 420 × UNC 1¼
181459
ROLLER’S UDKB LS 132 × 420 × UNC 1¼
181460
ROLLER’S UDKB LS 152 × 420 × UNC 1¼
181465
ROLLER’S UDKB LS 162 × 420 × UNC 1¼
181470
ROLLER’S UDKB LS 182 × 420 × UNC 1¼
181475
ROLLER’S UDKB LS 200 × 420 × UNC 1¼
181480
ROLLER’S dry diamond core drilling crowns LS – laser-welded
ROLLER’S TDKB LS 32 × 320 × UNC 1¼
181500
ROLLER’S TDKB LS 42 × 320 × UNC 1¼
181502
ROLLER’S TDKB LS 52 × 320 × UNC 1¼
181504
ROLLER’S TDKB LS 62 × 320 × UNC 1¼
181506
ROLLER’S TDKB LS 72 × 320 × UNC 1¼
181508
1 Technical specifi cations
Use for the intended purpose
WARNING
WARNING
The ROLLER’S Centro S1, ROLLER’S Centro S3, ROLLER’S Centro S2/3,5, ROLLER’S Centro SR electric diamond core drilling machines are intended for core drilling
in mineral building materials such as concrete, steel-reinforced concrete, all types of masonry, asphalt, all types of screed and natural stones using ROLLER’S universal
diamond core drilling crowns, dry or with water feed, hand held or on a drill stand in connection with a safety vacuum cleaner/dust extractor, e.g. ROLLER’S Protector M.
The ROLLER’S Centro DP electric diamond core drilling machine is intended for core drilling in mineral building materials such as concrete, steel-reinforced concrete, all
types of masonry, natural stone, asphalt and all types of screed using ROLLER’S dry diamond core drilling crowns LS, dry
dry, hand-held or on a drill stand, in connection with
dry
dry
a safety vacuum cleaner/dust extractor, e.g. ROLLER’S Protector M.
All other uses are not for the intended purpose and are therefore prohibited.
1.1 Scope of Supply
ROLLER’S Centro S1 Basic-Pack:
Electric diamond core drilling machine, water supply system, brace, G ½ UDKB tapping tool with Ø 8 mm drill,
size 3 Allen key, size 32 single open-ended wrench, operating instructions, steel case.
ROLLER’S Centro S1 Set Bohrständer S2:
ROLLER’S Centro S1 Basic-Pack, ROLLER’S Bohrständer S2.
ROLLER’S Centro S3 Basic-Pack:
Electric diamond core drilling machine, water supply device, brace, size 32 single open-ended wrench,
operating instructions, steel case.
ROLLER’S Centro S3 Set Bohrständer T:
ROLLER’S Centro S3 Basic-Pack, ROLLER’S Bohrständer T.
ROLLER’S Centro S3 Set 62-82-132 Bohrständer T: ROLLER’S Centro S3 Basic-Pack, ROLLER’S Bohrständer T, 1 ROLLER’S Universal diamond core drilling
crown Ø 62-82-132 mm each.
ROLLER’S Centro S2/3,5 Basic-Pack:
Electric diamond core drilling machine, water supply device, quick-release ring, size 32 single open-ended
wrench, operating instructions.
ROLLER’S Centro S2/3,5 Set Bohrständer T:
ROLLER’S Centro S2/3,5 Basic-Pack, ROLLER’S Bohrständer T.
ROLLER’S Centro SR Basic-Pack:
Electric diamond core drilling machine, water supply device, brace, size 32 single open-ended wrench,
spacer set, operating instructions, steel case.
ROLLER’S Centro SR Set Bohrständer T:
ROLLER’S Centro SR Basic-Pack, ROLLER’S Bohrständer T.
ROLLER’S Centro SR Set 62-82-132 Bohrständer T: ROLLER’S Centro SR Basic-Pack, ROLLER’S Bohrständer T, 1 ROLLER’S Universal diamond core drilling
crown Ø 62-82-132 mm each.
ROLLER’S Centro DP Basic-Pack:
Electric diamond core drilling machine, brace, G ½ TDKB tapping tool with Ø 8 mm drill, size 3 Allen key,
size 32 single open-ended wrench, operating instructions, steel case.
ROLLER’S Centro DP Set Bohrständer S2:
ROLLER’S Centro DP Basic-Pack, ROLLER’S Bohrständer S2.
ROLLER’S Centro DP Set Bohrständer T:
ROLLER’S Centro DP Basic-Pack, ROLLER’S Bohrständer T.
ROLLER’S Centro DP/Protector M Set-Pack:
ROLLER’S Centro DP Basic-Pack, ROLLER’S Protector M Set.
ROLLER’S Bohrständer S2:
Drill stand, size 6 Allen key, size 19 and 30 single open-ended wrench, 2 splay anchors, 10 anchor pins,
setting iron for anchor pins, cord threaded rod, quick-locking nut, washer, carbide masonry drill Ø 15 mm,
operating instructions.
ROLLER’S Bohrständer T:
Drill stand, size 6 Allen key, size 19 and 30 single open-ended wrench, 2 splay anchors, 10 anchor pins,
setting iron for anchor pins, cord threaded rod, quick-locking nut, washer, carbide masonry drill Ø 15 mm,
operating instructions.
