Roller Akku-Disc 100 22 V Instruction Manual Download

Page: 13 / 64

eng eng

1. Technical data

Use for the intended purpose

WARNING

ROLLER’S Disc 100, ROLLER’S Disc 100 RF, ROLLER’S Akku-Disc 100 22 V and ROLLER’S Disc 225 are intended for the purpose of cutting and deburring the inside

ROLLER’S Akku-Disc 100 22 V

and outside of pipes.

All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply

ROLLER’S Disc 100 Basic:

Pipe cutting machine, ring spanner size 27/17, instruction manual.

ROLLER’S Disc 100 RF Set:

Pipe cutting machine, ring spanner size 27/17, one each of pipe guides Ø 75 mm and 110 mm, operating instructions.

ROLLER’S Akku-Disc 100 22 V Basic: Cordless pipe cutting machine, Li-Ion 21.6 V, 5.0 Ah battery, Li-Ion rapid charger, ring spanner size SW 27/17, instruction manual.

ROLLER’S Disc 225 Basic:

Pipe cutting machine, ring spanner size 27/17, 2 height adjustable pipe rests 1 for pipes Ø 100 – 225 mm, Ø 4 – 8",

feed lever, spring plug, instruction manual.

1.2. Article numbers

ROLLER’S Disc 100 ROLLER’S Disc 100 RF ROLLER’S Akku-Disc 100 22 V ROLLER’S Disc 225

ROLLER’S Akku-Disc 100 22 V

Pipe cutting machine

845000

845006

845007

845005

ROLLER’S cutting wheel Cu-INOX for pipes of the press ﬁ tting

ROLLER’S

systems of stainless steel, copper, carbon steel

845050

845050 845050

845050

ROLLER’S cutting wheel Cu especially for pipes of the

ROLLER’S

press ﬁ tting systems of copper

845053

845053 845053

845053

ROLLER’S cutting wheel St for steel pipes, cast pipes (SML)

845052

ROLLER’S

845052 845052

845052

ROLLER’S cutting wheel C-SF especially for pipes of the

ROLLER’S

press ﬁ tting systems/push ﬁ tting systems of carbon steel,

simultaneously produces a chamfer

845055

845055 845055

845055

ROLLER’S cutting wheel V, s 10, for plastic and composite tubes,

ROLLER’S

wall thickness s ≤ 10 mm

845051

845051 845051

ROLLER’S cutting wheel P, s 21, for plastic and composite tubes,

ROLLER’S

wall thickness s ≤ 21 mm

845057

ROLLER’S cutting wheel RF

845054

ROLLER’S

ROLLER’S battery Li-Ion 21.6 V, 5.0 Ah

571581

ROLLER’S battery Li-Ion 21.6 V, 9.0 Ah

571583

Rapid charger Li-Ion 230 V

571585

Feed lever ROLLER’S Disc 225

845218

845218 845218

845218

Spring plug

089082 089082

Spring plug

089082 089082

089082

Base frame

849315

Base frame, movable

849310

Roller, pack of 4

845118

Rollers INOX (pack of 4) of tubular stainless steel

845110

Roller, pack of 4

845119

Roller insert for cutting pipes Ø 40 – 100 mm

845060

Ring spanner size 27/17

849112

849112 849112

849112

ROLLER’S Assistent 3B, material rest with tripod

120120

ROLLER’S Assistent WB, material rest with clamping device

120130

ROLLER’S Assistent XL 12"

120125

Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" 845220

Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4"

845220

Height adjustable pipe rest 1, Ø 100 – 225 mm, Ø 4 – 8"

845220

, Ø 4 – 8"

Height adjustable pipe rest 2, Ø 40 – 110 mm, Ø 1½ – 4"

845230

110 mm, Ø 1½ – 4"

ROLLER’S Werkmeister E, folding workbench

120240 120240

120240

ROLLER’S Werkmeister, folding workbench

120200

ROLLER’S Rondo 10 – 54 E, outside/inside pipe deburrer

113835

●

Only move or carry the ROLLER’S Disc 100 / ROLLER’S Disc 100 RF /ROLLER’S

Akku-Disc 100 22 V / ROLLER’S Disc 225 by the feed lever (6) when this has

been locked as described in 2.2. If the feed lever is not locked there is a danger

that the feed lever (6) will come away from the spindle (8). ROLLER’S Disc

100 / ROLLER’S Disc 100 RF /ROLLER’S Akku-Disc 100 22 V /ROLLER’S Disc

225 can then fall over or fall off. Danger of injury.

●

Protect yourself and persons accompanying the work against the rotating

pipe during cutting. There is a risk of injury.

● Never leave the pipe cutting machine running unattended. Switch off the

pipe cutting machine during longer work breaks and pull out the mains plug/

battery. Electrical devices can cause hazards which lead to material damage or

injury when left unattended.

● Children and persons who, due to their physical, sensory or mental abilities

or lack of experience and knowledge are unable to operate the pipe cutting

machine safely may not use this pipe cutting machine without supervision

or instruction by a responsible person. Otherwise there is a risk of operating

errors and injuries.

●

Only allow trained persons to use the pipe cutting machine. Apprentices

may only use the pipe cutting machine when they are over 16, when this is

necessary for their training and when they are supervised by a trained operative.

● The pipe cutting machine is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge unless they have been given supervision or instruction concerning the

use of the pipe cutting machine by a person responsible for their safety. Children

must be supervised to ensure that they do not play with the pipe cutting machine.

●

Check the power cable of the pipe cutting machine and extension leads

regularly for damage. Have these renewed by qualiﬁ ed experts or an authorised

ROLLER customer service workshop in case of damage.

●

Only use approved and appropriately marked extension leads with a sufﬁ cient

cable cross-section. Use extension leads up to a length of 10 m with cable

cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².

cross-section 1.5 mm², from 10 – 30 m w

Safety instructions for batteries

WARNING

Read all safety warnings, instructions, illustrations and speciﬁ cations provided

with this power tool. Failure to follow all instructions listed below may result in

electric shock, ﬁ re and/or serious injury.
Save all warnings and instructions for future reference.
See also www.albert-roller.de → Downloads → Instruction Manuals.

Explanation of symbols

WARNING

Danger with a medium degree of risk which could result in

death or severe injury (irreversible) if not heeded.

CAUTION

Danger with a low degree of risk which could result in minor

injury (reversible) if not heeded.

NOTICE

Material damage, no safety note! No danger of injury.

Read the operating manual before starting

Use ear protection

Electrical device complies with protection class II