Roller Axial-Press 25 22 V ACC, Instruction Manual

eng eng

●

Pull out the mains plug or remove the battery before assembly/disassembly 

of pressing heads, expanding heads. There is a risk of injury.

●

Comply with the maintenance regulations for the power tool and follow the 

maintenance instructions for pressing heads, expanding heads. Following 

the maintenance instructions will have a positive effect on the life expectancy of 

the power tool, pressing heads and expanding heads.

●

  Never let the power tool operate unattended. Switch off the power tool 

during longer work breaks, pull out the mains plug/battery. Electrical devices 

can cause hazards which lead to material damage or injury when left unattended.

●

Check the power cable, extension leads of the power tool and the power 

supply regularly for damage. Have these renewed by qualifi ed experts or an 

authorised ROLLER customer service workshop in case of damage.

●

Only allow trained persons to use the power tool. Apprentices may only use 

the power tool when they are over 16, when this is necessary for their training 

and when they are supervised by a trained operative.

●

Children and persons who, due to their physical, sensory or mental abilities 

or lack of experience and knowledge are unable to operate the power tool 

safely may not use this power tool without supervision or instruction by a 

responsible person. Otherwise there is a risk of injury due to false operation.

●

Only use approved and appropriately marked extension leads with a suffi -

cient cable cross-section. Use extension leads up to a length of 10 m with 

cable cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².

Safety notes for batteries, rapid chargers, 

power supply units

WARNING

WARNING

Read all safety warnings, instructions, illustrations and specifi cations provided 

with this power tool. Failure to heed the instructions can result in electric shock, 

fi re and/or severe injuries.
Save all warnings and instructions for future reference.
See also www.albert-roller.de → Downloads → Operating Instructions and 

www.albert-roller.de → Downloads → Safety Data Sheets → Batteries.

Explanation of symbols

WARNING

WARNING

   Danger with a medium degree of risk which could result in 

death or severe injury (irreversible) if not heeded.

CAUTION

CAUTION    

Danger with a low degree of risk which could result in minor 

injury (reversible) if not heeded.

NOTICE

Material damage, no safety note! No danger of injury.

Do not reach inside

Read the operating manual before starting

Use eye protection

Use ear protection

Electrical device complies with protection class II

Not suitable for using outdoors

Switched-mode power supply (SMPS)

Short-circuit-proof safety transformer (SCPST)

Environmental friendly disposal

CE conformity mark

1.  Technical Data

Intended use

WARNING

WARNING

ROLLER’S cordless axial presses are intended  for the purpose of making compres-

sion sleeve connections.

ROLLER’S pipe expanders are intended for the purpose of expanding and calibrating 

pipes.

ROLLER’S batteries, rapid chargers, power supply units are intended for use in 

accordance with the guidelines for use (fi g. 3).

33

All other uses are not for the intended purpose and are prohibited.
1.1.  Scope of Supply

Cordless axial presses/pipe expanders: Drive unit, Li-Ion battery, rapid charger, 

operating instructions, steel case

1.2.  Article numbers

 ROLLER’S Axial-Press 25 22 V ACC drive unit  

573020

 ROLLER’S 

Axial-Press 25 L 22 V ACC drive unit  

573021

 ROLLER’S Exparo 22 V ACC drive unit  

575010

LER’S E

LER’S E

Expander device Cu (ROLLER’S Exparo  22 V ACC) 

575252

LER’S E

LER’S E

Expander device P (ROLLER’S Exparo  22 V ACC) 

575253

LER’S E

LER’S E

Expander device P-CEF (ROLLER’S Exparo  22 V ACC) 

575256

LER’S E

LER’S E

ROLLER’S battery Li-Ion 21.6 V, 1.5 Ah 

571570

ROLLER’S battery Li-Ion 21.6 V, 2.5 Ah 

571571

ROLLER’S battery Li-Ion 21.6 V, 5.0 Ah 

571581

ROLLER’S battery Li-Ion 21.6 V, 9.0 Ah 

571583

Rapid charger Li-Ion 220 – 240 V, 70 W 

571575

Rapid charger Li-Ion 100 – 240 V, 90 W 

571585

Rapid charger Li-Ion 100 – 240 V, 290 W 

571587

Voltage supply 220 – 240 V, instead of 21.6 V, 15 A batteries 

571567

Voltage supply 220 – 240 V, instead of 21.6 V, 40 A batteries 

571578

Sheet steel case, ROLLER’S Axial-Press 25 22 V ACC / 

Axial-Press 25 L 22 V ACC 

578290

Sheet steel case, ROLLER’S Exparo  22 V ACC 

578290

LER’S E

LER’S E

1.3. Capacity

 ROLLER’S Axial-Press 25 22 V ACC / 25 L 22 V ACC 

axial press for making compression sleeve joints 

(sliding sleeve joints) on plastic pipes, composite pipes 

Ø 12 – 40 mm

See also www.albert-roller.de → Products → Pipe Crimping Technology → 

ROLLER’S Axial-Press 25 22 V ACC → Catalogue excerpt (PDF)

ROLLER’S Exparo  22 V ACC 

S E

S E

cordless pipe expander with Cu expander for expanding 

cordless pipe expander with Cu expander

cordless pipe expander with Cu expander

and calibrating soft copper pipes s ≤ 1.5 mm, soft aluminium 

pipes s ≤ 1.2 mm, soft precision steel pipes s ≤ 1.2 mm, 

soft stainless-steel pipes s ≤ 1 mm 

Ø 8 – 42 mm

Ø ⅜ – 1¾"

cordless pipe expander with P expander 

cordless pipe expander w

cordless pipe expander w

for expanding plastic pipes, composite pipes 

Ø 12 – 40 mm

cordless pipe expander with P-CEF expander for 

cordless pipe expander w

cordless pipe expander w

expanding plastic Cold Expansions Fittings (P-CEF) 

Ø 16 – 40 mm

Ø ½ – 1½"

s ≤ 4.95 mm

See also www.albert-roller.de → Products → Pipe Expanding Technology → 

ROLLER’S Exparo 22 V ACC → Catalogue excerpt (PDF)

Operating temperature range

ROLLER’S cordless presses 

–10 °C – +60 °C (14 °F – +140 °F)

ROLLER’S

ROLLER’S

Battery 

–10 °C – +60 °C (14 °F – +140 °F)

Rapid charger 

0 °C – +40 °C (32 °F – +104 °F)

Voltage supply 

–10 °C – +45 °C (14 °F – +113 °F)

Mains operated presses 

–10 °C – +60 °C (14 °F – +140 °F) 

Storage temperature range 

> 0°C (32 °F)

1.4.  Thrust force, stroke

Thrust force (rated force)

ROLLER’S Axial-Press 25 22 V ACC 

20 kN

ROLLER’S Axial-Press 25 L 22 V ACC 

13 kN

 ROLLER’S Exparo 22 V ACC 

20 kN

Stroke

 ROLLER’S Axial-Press 25 22 V ACC, 

Axial-Press 25 L 22 V ACC 

41 mm

 ROLLER’S Exparo 22 V ACC 

24 mm

1.5.  Electric Data

ROLLER’S Axial-Press 25 22 V ACC /  

LLER’S Axial-Press 25 22 V ACC /

LLER’S Axial-Press 25 22 V ACC /

21.6 V –

---; 1.5 Ah

ROLLER’S Axial-Press 25 L 22 V ACC    21.6 V –

---; 2.5 Ah

ROLLER’S Axial-Press 30 22 V 

  21.6 V –

---; 5.0 Ah

 ROLLER’S Exparo 22 V ACC 

ROLLER’S Axial-Press 25 L 22 V ACC    21.6 V 

ROLLER’S Axial-Press 30 22 V 

  21.6 V 

  21.6 V –

---; 9.0 Ah

Rapid charger Li-Ion 

Input  220 – 240 V~; 50 – 60 Hz; 70 W

220 – 240

220 – 240

Output  21.6 V 

21.6

21.6 –

---

   all-insulated,  interference-suppressed

Input  100 – 120 V~; 50 – 60 Hz; 70 W

Output  21.6 V –

---

   all-insulated,  interference-suppressed

11