22
eng eng
ROLLER’S TDKB LS 82 × 320 × UNC 1¼
181510
ROLLER’S TDKB LS 92 × 320 × UNC 1¼
181512
ROLLER’S TDKB LS 102 × 320 × UNC 1¼
181514
ROLLER’S TDKB LS 112 × 320 × UNC 1¼
181516
ROLLER’S TDKB LS 122 × 320 × UNC 1¼
181532
ROLLER’S TDKB LS 127 × 320 × UNC 1¼
181518
ROLLER’S TDKB LS 132 × 320 × UNC 1¼
181520
ROLLER’S TDKB LS 142 × 320 × UNC 1¼
181522
ROLLER’S TDKB LS 152 × 320 × UNC 1¼
181524
ROLLER’S TDKB LS 162 × 320 × UNC 1¼
181526
ROLLER’S TDKB LS 182 × 320 × UNC 1¼
181528
ROLLER’S TDKB LS 202 × 320 × UNC 1¼
181530
Expansion anchor M12 (masonry), 10 units
079006
EE
Knock-in anchor M12 (concrete), 50 units
079005
Flattener for knock-in anchor M12
182050
Carbide masonry drill Ø 15 mm SDS-plus
079018
Carbide masonry drill Ø 20 mm SDS-plus
079019
Fast-tightening nut set 160
079010
Fast-tightening nut set 500
183607
Knurled threaded rod M 12 x 52
079008
Fast-tightening nut
079009
Washer
079007
G ½ UDKB tapping tool for Ø 8 mm drill 180140
G ½ UDKB tapping tool for Ø 8 mm drill
G ½ UDKB tapping tool for Ø 8 mm drill
G ½ TDKB tapping tool for Ø 8 mm drill
180145
Carbide masonry drill Ø 8 mm
079013
Single-ended wrench SW 19
079000
Single-ended wrench SW 30
079001
Single-ended wrench SW 32
079002
Single-ended wrench SW 41
079003
Hexagon socket head wrench SW 3
079011
Hexagon socket head wrench SW 6
079004
Suction rotor for dust extraction
180160
Adapter G ½ male – UNC 1¼ male
180052
Adapter UNC 1¼ male – G ½ female
180056
Adapter UNC 1¼ male – Hilti BI
180053
Adapter UNC 1¼ male – Hilti BU
180054
Adapter UNC 1¼ male – Würth
180055
Annular core bit extension 200 mm
180155
Sharpening stone
079012
Pressurised water tank
182006
Quick-release ring
180015
Bull’s eye level
182010
Water extractor unit
183606
Rubber gasket Ø 200 mm (10 pieces)
183675
Vacuum fastening Bohrständer T
183603
Laser drilling centre pointer
183604
Spacer set (only ROLLER’S Centro SR)
183632
Drilling template Bohrständer T
183605
Vacuum pump
183670
ROLLER’S Protector L, dry and wet vacuum cleaner of dust class L 185500
ROLLER’S Protector M, dry and wet vacuum cleaner of dust class M 18550
ROLLER’S Protector M, dry and wet vacuum cleaner of dust class M
ROLLER’S Protector M, dry and wet vacuum cleaner of dust class M
1
Steel case with inlay
(ROLLER’S Centro S1, Centro S3, Centro SR)
180600 A
Steel case with inlay (ROLLER’S Centro DP)
180600 ADP
Machine cleaner
140119
1.3 Drilling depth
Useful drilling depth of the ROLLER’S Universal
diamond core drilling crown
420 mm
Useful drilling depth of the ROLLER’S dry
diamond core drilling crowns
320 mm
Deeper core bore holes with crown drill extension
((50) accessory art. no. 180155) see 3.7.
1.4 Drilling range
Core drilling
steel-reinforced
masonry
operations in
concrete
and others
ROLLER’S Centro S1
≤ Ø 102 (132) mm
≤ Ø 162 mm
ROLLER’S Centro S3
≤ Ø 152 (200) mm
≤ Ø 250 mm
ROLLER’S Centro S2 / 3,5
Ø 40 – 300 mm
Ø 40 – 300 mm
ROLLER’S Centro SR
≤ Ø 162 (200) mm
≤ Ø 250 mm
ROLLER’S Centro DP
≤ Ø 162 (202) mm
≤ Ø 202 mm
Annular-bit connection thread
ROLLER’S Centro S1, Centro S3, Centro SR, Centro DP
UNC 1¼ male, G ½ female
ROLLER’S Centro S2 / 3,5
UNC 1¼ male
Drill collar Ø
ROLLER’S Centro S1, Centro S3, Centro SR, Centro DP
60 mm
, Centro DP
, Centro DP
Drilling range with drill stand
ROLLER’S Centro S1 with Bohrständer S2, Bohrständer T
Ø 162 mm
ROLLER’S Centro S3
with Bohrständer S2, Bohrständer T
Ø 200 mm, Ø 250 mm
ROLLER’S Centro S2 / 3,5 with Bohrständer T
Ø 300 mm
ROLLER’S Centro SR
with Bohrständer S2, Bohrständer T
Ø 200 mm, Ø 250 mm
ROLLER’S Centro DP with Bohrständer S2, Bohrständer T
Ø 202 mm
Drilling range with vacuum fastening
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
Ø 132 mm
1.5 Turning speed 230 V
Idling
At rated load
ROLLER’S Centro S1
830 min־¹
580 min־¹
ROLLER’S Centro S3
750, 1800, 2500 min־¹ 530, 1280, 1780 min־¹
ROLLER’S Centro S2 / 3,5
490, 1160 min־¹
320, 760 min־¹
ROLLER’S Centro SR
250 – 1200 min־¹
250 – 1200 min־¹
ROLLER’S Centro DP
1200 min־¹
880 min־¹
ROLLER’S Centro DP micro-pulse
28800 min־¹
21120 min־¹
Turning speed 115 V
ROLLER’S Centro S1
940 min־¹
740 min־¹
ROLLER’S Centro S3
770, 1860, 2580 min־¹ 570, 1380, 1920 min־¹
ROLLER’S Centro S2 / 3,5
440, 1030 min־¹
290, 680 min־¹
ROLLER’S Centro SR
250 – 1200 min־¹
250 – 1200 min־¹
ROLLER’S Centro DP
1120 min־¹
880 min־¹
ROLLER’S Centro DP micro-pulse
26880 min־¹
21120 min־¹
1.6 Electrical specifi cations 230 V
ROLLER’S Centro S1
230 V~; 50 – 60 Hz; 1850 W; 8.4 A
ROLLER’S Centro S3
230 V~; 50 – 60 Hz; 2200 W; 10.0 A
ROLLER’S Centro S2 / 3,5
230 V~; 50 – 60 Hz; 3420 W; 16.0 A
ROLLER’S Centro SR
230 V~; 50 – 60 Hz; 2200 W; 9.6 A
ROLLER’S Centro DP
230 V~; 50 – 60 Hz; 2200 W; 10.0 A
Fuse protection (mains network)
ROLLER’S Centro S1
10 A (B)
ROLLER’S Centro S3, Centro S2 / 3,5, Centro SR, Centro DP
16 A (B)
, Centro DP
, Centro DP
Protection class
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
l
ROLLER’S Centro DP
Il
Fault-current safety switch PRCD with low-voltage release
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
10 mA
Electrical specifi cations 115 V
ROLLER’S Centro S1
115 V~; 50 – 60 Hz; 1700 W; 15 A
ROLLER’S Centro S3
115 V~; 50 – 60 Hz; 2050 W; 18 A
ROLLER’S Centro S2 / 3,5
115 V~; 50 – 60 Hz; 2820 W; 25 A
ROLLER’S Centro SR
115 V~; 50 – 60 Hz; 2200 W; 19 A
ROLLER’S Centro DP
120 V~; 50 – 60 Hz; 2050 W; 18 A
Fuse protection (mains network)
ROLLER’S Centro S1
20 A (B)
ROLLER’S Centro S3, Centro S2 / 3,5, Centro SR, Centro DP
25 A (B)
, Centro DP
, Centro DP
Protection class
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
l
ROLLER’S Centro DP
Il
Fault-current safety switch PRCD with low-voltage release
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
6 mA
1.7 Dimensions (L × W × H)
ROLLER’S Centro S1
450×170×100 mm (17.7"×6.7"×3.9")
ROLLER’S Centro S3
550×170×105 mm (21.6"×6.7"×4.1")
ROLLER’S Centro S2 / 3,5
490×205×150 mm (19.3"×8.1"×5.9")
ROLLER’S Centro SR
590×145×110 mm (23.2"×
10
10
5.7"×4.3")
ROLLER’S Centro DP
565×170×100 mm (22.2"×6.7"×3.9")
ROLLER’S Bohrständer S2,
drill stand
435×245×805 mm (17.1"×9.6"×31.7")
ROLLER’S Bohrständer T,
drill stand
360×555×1050 mm (14.2"×21.8"×41.3")
1.8 Weights
ROLLER’S Centro S1
5.2 kg (11.5 lb)
ROLLER’S Centro S3
7.4 kg (16.3 lb)
ROLLER’S Centro S2 / 3,5
14.4 kg (31.7 lb)
ROLLER’S Centro SR
6.4 kg (14.1 lb)
ROLLER’S Centro DP
7.0 kg (15.4 lb)
ROLLER’S Bohrständer S2, drill stand
12.0 kg (26.4 lb)
ROLLER’S Bohrständer T, drill stand
19.5 kg (43.0 lb)
1.9 Noise emissions
Sound pressure
Operating sound
level L
PA
level L
WA
ROLLER’S Centro S1, Centro S3
90 dB(A)
103 dB(A)
ROLLER’S Centro S2 / 3,5, Centro SR
91 dB(A)
104 dB(A)
ROLLER’S Centro DP
99 dB(A)
110 dB(A)
Uncertainty K
3 dB(A)
3 dB(A)
1.10 Vibrations
Weighted effective value of acceleration
ROLLER’S Centro S1, Centro S3, Centro S2 / 3,5, Centro SR
2.5 m/s²
ROLLER’S Centro DP with micro-pulse technology, free-hand
17.5 m/s²
ROLLER’S Centro DP with micro-pulse technology, with drill stand 4.8 m/s²
Uncertainty K
1.5 m/s²
