5
Rollerdor RD20X2ANSA Control Box, Edition 2022/1
Pictures are for illustration purposes only, connector blocks are not provided and further fittings may be required.
fig.12
(B) Press and hold the operation button on the front of the
receiver box next to RED LED
(fig.13)
for 1 second then release.
(C) Wait 2 seconds then press and release the operation button.
The door will start to close, and will stop just before it touches
the floor. The curtain will then partially reopen to confirm that
the commissioning has been a success.
WARNING: you must not stop the door at any point
during the commissioning cycle. If the door is
stopped or the commissioning doesn’t work please
repeat from Step (A).
fig.13
